Mitsubishi Electric iMode M341i Owner's Manual page 75

PROBLEM
Menu limit reached
Message not sent
Network busy
Network not allowed
New PIN2
incorrect. Try again
New PIN
incorrect. Try again
No response
Not allowed
Not allowed
(fixed
dialling)
Number changed
Page has no content
PIN blocked
PIN2 blocked
PUK2 blocked
Reaching
allowed credit!
Registration
required
Ring volume Off
Server limit reached
Service not available
SIM blocked. Contact
provider
SIM blocked. Enter PUK:
SIM fixed full
SIM names full
Phone names full
Incorrect code. Try again
Incorrect new code. Try
again
Incorrect PIN, try again
Incorrect PIN2, try again
Incorrect PUK, try again
Incorrect PUK2, try again
POSSIBLE CAUSE AND SOLUTION
A new service menu item has been received but the remaining storage
space is insufficient to store it. Delete one or more registered menu
items (My Services menu) and either accept or discard the new menu.
The handset may be out of the network range or the network is
temporarily overloaded.
You have tried to make a call. The call is rejected by the network due to
congestion problems.
When selecting network manual search, you have selected a network
that rejects the connection.
Changing PIN2: the new PIN2 code values differ (value control).
Changing PIN: the new PIN code values differ (value control).
You have made a call to a remote user and no response has been
received.
Your number/character entry is not allowed.
A call has been attempted, but failed due to fixed dialling control (the
number dialled does not match any of the fixed dialling numbers in the
memory).
The called number has changed.
Your request was accepted by the network but the required server page
is empty.
An incorrect PIN code has been entered 3 times.
An incorrect PIN2 code has been entered 3 times.
An incorrect PUK2 code has been entered 10 times.
The SIM services protected by the PIN2 code have now been
permanently disabled.
The cost limit is about to be reached. The connected call ends
automatically when the limit is reached.
You have not registered with any service. Go to the Service registration
menu.
The ring volume is set to 0 (no volume)
A new service has been received but the remaining storage space is
insufficient to store it. Delete one or more registered service(s) -
Settings menu - and accept or discard the new service.
Activating some GSM services that are not available on the network
An incorrect PUK has been entered 10 times.
The SIM card has been permanently disabled and needs to be replaced
by a new one.
An incorrect PIN code has been entered 3 times.
Enter the PUK code to unblock the SIM card.
The corresponding memory is full.
An incorrect phone lock code has been entered.
The new phone lock codes do not match (value control).
The incorrect code has been entered.
Appendix
75-