Menu Multiswitch Nautic-, Multiswitch-, Multiprop Function On Channel 7 Or 8 - Servonaut Zwo4 HS12 User Manual

10.3 Menu Multiswitch
Green button [Menu] >[ Multiswitch]
Some of the common light sets need an
additional multiswitch or nautic module in
the radio. Such a module can be used as a
channel extension to get more servos in the
model or more switching functions. Normally
an additional multiprop, nautic or multiswitch
decoder is necessary.
With the HS12 this channel extension is
already built-in. The HS12 supports systems
from Robbe/Futaba als well as Graupner/JR
on channel 7 or 8. After each time switching
the multiswitch function on/off the receiver
needs to be bound again to set the changes.
Your radio shows a hint to remind you.
24 Menu Multiswitch
Nautic-, Multiswitch-, Multiprop function on channel 7 or 8
Menu buttons
[OK] Green
Back to the superordinate menu.
[Reset] Red
Deletes all settings on this page and
restores the factory settings.
[1v2] Blue
Shows the number of pages and turns to the
next one. Page 1 is for channel 7, page 2 for
channel 8.
Softkeys
[Channel7] [Channel8]
Switches the multiswitch function for the
channel on/off (on = black underlined, see
screenshot). You can only choose one of
the two channels.
[Type]
Switches between Robbe/Futaba
Graupner/JR system.
[Pulsetrim]
Allows the fine tuning of the impulse length.
This adjustment is only an emergency
option - contact the Servonaut Team via
email at sender@servonaut.de.
[Zero position]
Allows the fine tuning of the impulse length.
This adjustment is only an emergency
option - contact the Servonaut Team via
email at sender@servonaut.de.
and