Installation Of Vokera Time Clock - VOKERA Mynute 12e Installation & Servicing Instructions Manual

SECTION 8: WIRING DIAGRAMS
8.5

INSTALLATION OF VOKERA TIME CLOCK (24

hour & 7 day versions).
Isolate the appliance from the electrical supply
and remove the casing as described in 4.7.1.
Remove the circular blanking disc from the
clock aperture plate.
Remove the terminal strip cover from the
appliance.
Connect the wires to the clock as shown in
fig.24.
Mount the clock to the clock aperture plate
using the screws provided.
Remove the factory fitted link between
terminals 1 & 2 on the appliance terminal strip.
Connect the clock wires to the appliance
terminal strip as shown in fig. 24
Replace the terminal cover and casing once
the clock installation has been completed.
230V @ 50Hz Supply
N
3 AMP Fuse
L
E
E L N 1
Appliance Terminal Strip
NOTE: remove link between 1 &
2 on appliance terminal block
fig. 24
NOTE
If the connection of a room thermostat is also required,
the spare terminals on the appliance terminal strip can be
used for this purpose.
If an external time clock is preferred, it must have 'voltage
free connections'. This appliance requires a permanent
electrical supply.
28
red/white
blue
white
red/black
2 3 4 5 6
1 2 3 4 5
Vokera time clock
8.6 INSTALLATION OF VOKERA TWIN CHANNEL
PROGRAMMER
Isolate the appliance from the electrical supply
and remove the casing as described in 4.7.1.
Remove the circular blanking disc from the
clock aperture plate.
Remove the terminal strip cover from the
appliance PCB cover.
Remove the factory fitted link between
terminals 1 & 2 on the appliance terminal strip.
Take the wires supplied with the programmer
and connect them as shown in fig. 25.
Mount the clock to the clock aperture plate
using the screws provided.
Connect any external controls as detailed in
8.3 or 8.4.
Replace the terminal cover and casing once
the programmer installation has been
completed.
230V Supply
Red
L 3 4
E N 1 2
fig. 25
NOTE
The appliance and integral programmer must be
connected as described in these instructions, to ensure
the safe and correct operation of this appliance.
Vokera Twin Channel
Programmer
HW On
Pink
HW Off
Grey
Heating On
Purple
Heating Off
Brown
Live Supply
Blue
Neutral
Appliance Terminal Strip
5 6
Mynute