Contents Applicability Safety instructions Parts and interior equipment Usage for age (group I) Setting the shoulder belt height(group I) Securing the child car seat(group I) Loosening the harness Securing the child with the harness 4.4.1 Using the buckle Usage for age (group II III) Removal of the harness 5.
NOTES Please read through these instructions carefully before using the child car seat for the first time. You risk endangering your child’s life if you use the product incorrectly. 1. APPLICAbILIty The child car seat is suitable for weight categories I to III (Group I-III), which means children with a body weight between 9kg and 36kg (approx.
2. SAfety InStRUCtIonS Please invest a few minutes in your child’s safety to read these instructions, Many injuries, which are easily avoidable, are caused by carelessness and incorrect use. ● Ensure plastic parts and rigid items of the child seat are located and installed so they are not liable to be trapped by a moveable seat or a door of the vehicle.
● Luggage or other objects liable to cause injuries in the event of a collision shall be properly secured. ● The child car seat must not be used without the cover. ● The seat cover should not be replaced with any other than the one recommended by the manufacturer.
4. USAGe foR tHe AGe GRoUP 2 Use of the harness system is only permitted for children of age Group I, which means from 9kg to 18kg(approx. 9 months to approx. 4 years). 4.1 Setting the shoulder belt height(Group I) Check whether the shoulder belts are set at the right height for your child.
Step 3: Slide the belt off the chest pad connector. (Fig. 3) . Step 4: Now you can pull both chest pads and shoulder belts forward through the belt slots carefully (fig. 4). Step 5: Now thread the small belts of the chest pads and harness into the corresponding belt slots.(fig.
Page 8
Step 3: Place the vehicle lap belt under the arm rest. Note: Pull the vehicle diagonal belt on the vehicle buckle side through the red belt guide and the vehicle lap belt under the arm rest. Make sure adult belt has not become twisted (fig.
4.3 Loosening the harness ● The harness is slackened by pressing the lever (under the seat cover) on the front of the seat. ● The two shoulder straps with your other hand. Pull the shoulder straps towards you to loosen the harness. (see PRESS the picture on the right) 4.
4.4.1 Using the buckle ● Put the two metal sections of the buckle connectors together.(fig. 1) ● Slot the two buckle connectors into the slot in the top of the buckle until they ‘click’ into place (fig. 2) ● Check the harness is correctly locked by pulling the shoulder straps upwards(fig.
5. 2 Height adjustment of head rest Regularly check whether the head rest is optimally to your child. The height of the head rest is set optimally to the size of your child, when their head rests comfortably in the middle of the head rest. ●...
5. 3 Securing the child car seat with vehicle’s belt The vehicle’s 3-point belt system may only be used to buckle up children of the age groups II and III(15kg-36kg). The harness system must be removed from the seat (see point 5.1) when used for these age groups 15kg-36kg.
6. CARe InStRUCtIonS 6.1 Removing / replacing the cover ● Remove the belt system as described in point 5.1. ● Press the backrest so far back so that it rests flat on the floor. ● Now you can remove the backrest. ●...
Need help?
Do you have a question about the 123 and is the answer not in the manual?
Questions and answers