Prefix/Suffix Values; Scan Data Transmission Format - Symbol LS2208 Product Reference Manual

13 - 4 Symbol LS2208 Product Reference Guide

Prefix/Suffix Values

You can append a prefix and/or suffix to scan data for use in data editing.
To set a value for a prefix or suffix:
Change the scan data format by scanning the appropriate
1.
Scan the appropriate prefix/suffix bar code below.
2.
Scan a four-digit number (i.e., four bar codes from
3.
value.
To correct an error or change a selection, scan
4.

Scan Data Transmission Format

To change the scan data format, scan Scan Options and one of the following four bar codes corresponding to the
desired format:
• Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>.
Scan Enter on page 13-5
Values on page 13-4. Scan Data Format Cancel on
If you require a carriage return/enter after each scanned bar code, scan the following bar codes in order:
Scan Options
1.
<DATA> <SUFFIX>
2.
Enter (on page
3.
to complete the change. To set values for the prefix and/or suffix, see
13-5).
Scan Data Transmission Format on page
Appendix D, Numeric Bar
Cancel on page D-3.
Scan Prefix
Scan Suffix
page 13-5 to cancel the change.
Scan Options
13-4.
Codes) that corresponds to that
Prefix/Suffix