Advertisement
Quick Links
Do's and Don'ts
Do read the entire instruction leaflet before commencing installation.
Do install each fan with a means for disconnection in all poles in the fixed wiring.
Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any
maintenance or cleaning.
Guarantee
UK only:
We, Applied Energy Products Ltd., provide a guarantee against faulty parts and manufacture for a period of 3 years
from the date of purchase. In the unlikely event of a product breakdown during the guarantee period the product
should be returned to the place of purchase or to Applied Energy Products Ltd.
Exclusions:
This guarantee does not cover compensation for the loss of the product or consequential loss of any kind.
Damage or defects to the product arising from incorrect installation or lack of maintenance.
Transportation costs.
This guarantee does not affect your statutory rights.
Technical advice and service.
Customers outside UK - see international below.
UK: Xpelair have a comprehensive range of services including:
Free technical advice help-desk from Engineers on all aspects of ventilation.
Free design service, quotations and site surveys.
Service and maintenance contracts to suit all requirements.
Please ask for details:
By telephone on Techline: +44 (0) 844 372 7766
By fax on Techfax: +44 (0) 844 372 7767
At the address below
Head Office, UK Sales Office and Spares
Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ England
Telephone: +44 (0) 844 372 7761
Fax: +44 (0) 844 372 7762
Sales/Spares Hotline: +44 (0) 844 372 7750
Sales/Spares Faxline: +44 (0) 844 372 7760
http:\\www.xpelair.co.uk
International.
Guarantee: Contact your local distributor or Xpelair direct for details.
Technical Advice and Service: Contact your local Xpelair distributor.
Installation and Maintenance Instructions
Xpelair SLDC150
Xpelair SLDC150P
Xpelair SLDC150T
Xpelair SLDC150HT
Xpelair SLDC150PIR
Toilet / Bathroom 150mm Ultra DC Slimline Fan Range
Part No: 24119AA
(Revision A)
Standard
Pull Cord
Timer
Humidistat, Timer and Pull Cord
Integral Body Movement Sensor
Advertisement
Related Manuals for Xpelair SLDC150
Summary of Contents for Xpelair SLDC150
- Page 1 Sales/Spares Hotline: +44 (0) 844 372 7750 Sales/Spares Faxline: +44 (0) 844 372 7760 http:\\www.xpelair.co.uk International. Guarantee: Contact your local distributor or Xpelair direct for details. Technical Advice and Service: Contact your local Xpelair distributor. Part No: 24119AA (Revision A)
- Page 2 The switch marked 2 above it is a factory set position and should not be changed. For the SLDC150 range this switch should be in the DOWN position (the side of the switch marked ‘150mm size’). If this switch is NOT in the correct position the fan will NOT achieve the required speeds.
- Page 3 To set the trickle speed to OFF, set the switch shown in Figure F (this is the switch marked 1 above it) to the UP position (away from the side of the switch marked ‘ON’). Setting the Delay Start – SLDC150 / SLC150PC / SLDC150T / SLDC150HT Only These fans can be set so that there is a 2-minute time delayed start.
- Page 4 Children should be supervised to ensure they do not play with the appliance. Department. (For overseas markets contact your local Xpelair distributor). If you have any queries before installing these products or after they have been installed, call the Xpelair Technical Hotline ...
Need help?
Do you have a question about the SLDC150 and is the answer not in the manual?
Questions and answers