Changing The Setting Of The Audio Input Terminals - Yamaha YVC-1000 User Manual

Changing the setting of the audio
input terminals
Change the setting depending on the device connected
to the audio input terminals. The setting can be
configured for both the L and R terminals.
When an external microphone is selected, you can set
the output level and adjust the sensitivity and tone.
Audio input terminals
■
When the video conference system is
connected:
The factory settings are compatible with the connection
of the video conference system; therefore, you do not
need to change them. Reconfigure the settings when
connecting the video conference system in place of an
external microphone.
1
In the "YVC-1000 Configurator"
window, select the "AUDIO IN" tab.
2
Select "CONFERENCE SYSTEM"
from the "MODE" drop-down list.
Select this item for the terminal (either or both of the
L and R terminals) connected to the video
conference system.
■
When an external microphone is
connected:
1
In the "YVC-1000 Configurator"
window, select the "AUDIO IN" tab.
2
Select "PA MICROPHONE" from the
"MODE" drop-down list.
Select this item for the terminal (either or both of the
L and R terminals) connected to the external
microphone.
After completing the setting, conduct a test to
identify whether there are any problems in relation
to the audio sound of the external microphone.
Note
If "PA MICROPHONE" is selected, the latency
compensation of external speakers, which has been set by
the automatic audio tuning function, will not be enabled.
Select
Select
36