Job Timeout; Tcp/Ip Menu - Lexmark E260 Series User Manual

Menu item
View Network Address
UAA
LAA

Job Timeout

0-225 seconds
Banner Page
On
Off

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item
TCP/IP
Activate
On
Off
TCP/IP
View Hostname
TCP/IP
IP Address
TCP/IP
Netmask
TCP/IP
Gateway
TCP/IP
Enable DHCP
Yes
No
TCP/IP
AutoIP
Yes
No
Description
Both addresses are represented by 12-digit hexadecimal numbers.
Sets the amount of time in seconds that a network print job can take before it
is canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, the setting is saved as 10.
Allows the printer to print a banner page.
Note: Off is the factory default setting.
Description
Specifies whether to activate TCP/IP
Note: On is the factory default setting.
Shows the current TCP/IP hostname
Lets you view or change the current TCP/IP Address information
Note: This is a four-field IP Address.
Lets you view or change the current TCP/IP Netmask information
Note: This is a four-field IP Netmask.
Lets you view or change the current TCP/IP Gateway information
Note: This is a four-field IP Gateway.
Lets you view or change the setting
Note: Yes is the factory default setting.
Lets you view or change the setting
Note: Yes is the factory default setting.
Understanding printer menus
87