Page 2
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
LASER SAFETY INFORMATION For U.S.A Class 1 LASER-Product This product is certified to comply with DHHS Rules 21 CFR Subchapter J. This product complies with European Standard EN60825 (or IEC Publication 825) For all areas This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation. Caution: (1) Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
SAFETY PRECAUTIONS 1. Before servicing, unplug the power cord to prevent an electric shock. 2. When replacing parts, use only manufacture's recommended components for safety. 3. Check the condition of the power cord. Replace if wear or damage is evident. 4.
Page 5
Note that the Use of battery packs other than those manufactured and recharging time varies based on the usage condi- supplied by Panasonic may present a safety hazard tions. (Recharging takes longer than usual when (generation of heat, ignition or rupture).
Page 8
0.2 _ 0.02N m (2.0 _ 0.2kgf cm) 0.25 _ 0.02N m (2.5 _ 0.2kgf cm) 0.12N m (1.0 1.2kgf cm) 0.12 0.13N m (1.2 1.3kgf cm) 0.45 _ 0.02N m K107 (4.5 _ 0.2kgf cm) CF-U1AQC2ZAM 8 / 10...
Page 9
Replacement Parts List Comparison Table Note : Important Safety Notice Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts. CF-U1AQC2ZAM PART NO. REF. NO and AREA DESCRIPTION Q'TY CF-U1ANB8ZJM...