CMA Dishmachines L-1X16 Quick Setup Instructions page 2

L -1X16 / L -1X
Quick Setup
Instructions
WARNING: Electrical and plumbing
connections need to be made by a
licensed service person and comply
with all Federal, State and Local
Health, Electrical, Plumbing and
Safety codes.
STEP
6
Turn power switch to "ON" position.
STEP
7
Press and Hold down "SANI", "DETERGENT"
and "RINSE" switches to prime chemicals.
This step must be repeated each time
chemical containers are changed.
STEP
8
Hold down "FILL" Switch for approximately 10 - 15 seconds to allow water to flow
into the dishwasher. Water should reach "FILL LINE" which is located
inside at the back of the wash tank. Close door, then press "START" switch.
NOTE: The 4th cam of timer assembly has to be adjusted to maintain the same
water level during the cycle.
FRONT VIEW
800-854-6417
DELIMER
TO OPERATE MACHINE
SET SWITCH TO
NORMAL
8
FILL / START
DRAIN
6
POWER
DETERGENT
7
PRIME SWITCH
SANI 7
PRIME SWITCH
RINSE 7
PRIME SWITCH
CHEMICAL PUMPS
FILL LINE
5-2015