Setting Items By Scanning Method - Fujitsu scansnap ix500 Operator's Manual
Hide thumbs
Also See for scansnap ix500:
- Operator's manual (480 pages) ,
- Advanced operation manual (153 pages) ,
- Operating instructions manual (143 pages)
Table of Contents
Advertisement
Setting Items by Scanning Method
Setting items that you can configure in the ScanSnap setup dialog box/window differ
depending on a scanning method. You can select a scanning method in accordance with the
usage.
Profile
Application
Save
Scanning
File option
Paper
Compression
OK and NA in the tables indicate the following:
OK: Available
NA: Not available
For details about setting items and default settings, refer to the ScanSnap Manager Help.
Profile
Profile button
Setting Item
Recommended
Small File
High Quality
Customize
Profile
Setting Item
Profile Management
(→page
468)
(→page
469)
(→page
470)
(→page
471)
(→page
473)
(→page
474)
(→page
475)
Setting Items by Scanning Method
Quick Menu
OK
OK
OK
OK
Quick Menu
NA
468
Profile
ScanSnap
Folder
NA
NA
NA
NA
NA
NA
NA
NA
Profile
ScanSnap
Folder
OK
NA
- Quick Links:
- Scan from a Computer
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the scansnap ix500 and is the answer not in the manual?
Questions and answers
wireless scanning
To perform wireless scanning with the Fujitsu ScanSnap iX500:
1. Connect the Scanner to Wi-Fi:
- Ensure the Wi-Fi switch on the back of the ScanSnap iX500 is turned on.
- If needed, use the WPS button to connect to a WPS-compatible wireless access point.
2. Initial Setup via USB:
- Connect the ScanSnap iX500 to a computer using a USB cable for initial configuration.
- Configure the scanner for wireless scanning using the ScanSnap Wireless Setup Tool.
- Once configured, disconnect the USB cable.
3. Perform Wireless Scanning:
- Load a document face-down and head-first into the scanner.
- Press the [Scan] button to start scanning.
- The scanned document will be sent wirelessly to the configured computer or mobile device.
For scanning to a mobile device or ScanSnap Cloud, ensure the scanner is connected accordingly.
This answer is automatically generated
how to connect it to my computer?
To connect the Fujitsu ScanSnap iX500 to a computer, follow these steps:
1. USB Connection (Initial Setup)
- Plug the ScanSnap iX500 into the computer using a USB cable.
- Install the required software, such as ScanSnap Manager.
- Ensure the system meets the minimum requirements (Windows XP/Vista/7/8/8.1/10, Intel Core i5 2.5 GHz or higher, 4GB RAM, and sufficient disk space).
2. Wireless Connection (Optional)
- Initially, connect the scanner via USB to configure the wireless settings.
- Open ScanSnap Manager and access the Wireless Network Setup.
- Follow the prompts to connect the scanner to a Wi-Fi network.
- Once configured, disconnect the USB cable.
- The scanner can now wirelessly connect to the configured computer.
Note: The scanner can only connect wirelessly to one computer at a time. To switch computers, repeat the USB setup process.
This answer is automatically generated