Restarting Using Mitel Web Ui; Setting Factory Defaults; Set Phone To Factory Defaults/Erase Local Configuration - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
RESTARTING THE PHONE USING THE MITEL WEB UI
MITEL WEB UI
1. Click on Operation->Reset->Phone.
2. Click Restart to restart the phone.
SET PHONE TO FACTORY DEFAULTS/ERASE LOCAL
CONFIGURATION
You can set phones to their factory default settings or remove a local phone's configuration
using the IP Phone UI or the Mitel Web UI.
SETTING FACTORY DEFAULTS ON THE PHONE
Factory default settings are the settings that reside on the phone after it has left the factory.
Performing a factory default on the phone will revert all the settings in the startup.cfg,
<model>.cfg, <mac>.cfg, and local configuration back to the original factory values. You can
reset a phone to factory defaults using the IP Phone UI or the Mitel Web UI.
Note: Performing a factory default is only applicable to the phone settings and does not
affect the firmware version loaded on the phone.
Setting Factory Defaults Using the IP Phone UI
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Administrator Menu and enter your Administrator Password (default is 22222).
3. Select Factory Default.
The "Restore Defaults?" prompt displays.
4. Press # to confirm.
3-14