Fujitsu Eternus DX60 S2 User Manual page 62

Chapter 5 Installing Optional Products
5.1 Installing Disks
5
5-1
5-2
5-3
5-4
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Install the new disk.
Press the catch on the disk lock lever to unlock it.
Catch
1
2
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
•
IMPORTANT
•
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
Make sure that the lock lever hooks have engaged the slot
IMPORTANT
protrusions.
Check that the newly installed disk's DISK READY/FAULT LED lights up green after
approximately 30 seconds.
Copyright 2011 FUJITSU LIMITED
Lock lever
Hold the disk with both hands to protect against jarring.
Insert the disk until the lock lever hooks reach the slot
protrusions.
Lock lever hooks
have engaged
Slot
protrusion
Hook
62
Lock lever
Lock lever hooks
have not engaged
Slot
protrusion
Hook
P3AM-5512-02ENZ0