Advertisement
Table of Contents
- 1 Specification
- 2 Name of Parts
- 3 Spare Parts
- 4 Appearance and Function of Control Panel
- 5 Operation Display
- 6 Operation Introduction
- 7 Before Using
- 8 Operation Temperature Range
- 9 Cooling Operation
- 10 Installation Explanations
- 11 Introduction to Exhaust Hose Installation
- 12 Maintenance Explanations
- 13 Drainage
- 14 Troubleshooting
- Download this manual
Advertisement
Table of Contents
Related Manuals for SUNTEC Klimatronic Progress 7.0 plus
Summary of Contents for SUNTEC Klimatronic Progress 7.0 plus
- Page 1 Progress plus Instruction manual...
- Page 2 Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 10 Please read this user’s manual carefully to ensure proper use, maintenance and installation.
- Page 3 SPECIFICATION Model No. Klimatronic Progress 7.0 plus Klimatronic Progress 9.0 plus Klimatronic Progress 12.0 plus Volt 230V~50Hz AC 230V~50Hz AC 230V~50Hz AC Power consumption (EN14511) 780 W 980 W 1340 W Cooling capacity 2050 W 2600 W 3500 W Air Flow Volume 320 m³/h...
-
Page 4: Name Of Parts/Spare Parts
Name of Parts, Figure 1 Spare Parts, Figure 2 1. rear cover 5. caster 9. exhaust pipe 2. air inlet 6. power line 10. flat fixing clip 3. front cover 7. air inlet 11. square fixing clip 4. operation panel 8. - Page 5 Operation Introduction, Figure 6 Before starting operations in this section: Find a place where there is power supply nearby. As shown in the figure on the right, install the exhaust hose, and adjust the window position well. Insert the power cord into an grounded AC230V/50Hz socket; Press the POWER button to turn on the air-conditioner.
- Page 6 Timer On setting dehumidifying: Choose the dehumidifying mode as described in 4. When the air-conditioner OFF, press “Timer” button and select a desired ON time through the temperature and time setting buttons. Time can be regulated at any time in 0-24 hours. Press the “Timer”...
- Page 7 Troubleshooting Troubles Possible Causes Suggested Remedies Unit does not start when pressing POWER - Water full indicator lamp blinks, and water tank Dump the water out of the water tank. button is full. - Room temperature is higher than the setting Reset the temperature temperature.
- Page 8 How can I increase the efficiency of the External circumstances exist which may impact PROGRESS unit? the efficiency of the PROGRESS unit. Room insulation, use of wall/window adapter, ratio of window space (solar radiation), operation of electrical units in the room (EDP), presence of several persons in the room.
- Page 9 Kyoto Protocol and may thus contribute to global warming, if it is released to the atmosphere. Therefore only trained technicians with refrigerant certificate make a filling or emptying. Suntec your air conditioner does not have to use if used properly and undamaged coolant circuit can be refilled with refrigerant.
Need help?
Do you have a question about the Klimatronic Progress 7.0 plus and is the answer not in the manual?
Questions and answers