Advertisement
Advertisement
Table of Contents
Summary of Contents for Vidao V7
- Page 1 7 DEVICE UNIVERSAL REMOTE CONTROL User Manual Model: V7...
-
Page 2: Device Buttons
PLEASE NOTE: Most universal remote controls may only operate the main functions of your device. To control every function of your device you may want to consider purchasing an original remote control from the device manufacturer. DEVICE BUTTONS There are 5 Device buttons near the top of this remote below the POWER & SET buttons. -
Page 3: Brand Code Entry
BRAND CODE ENTRY 1. Turn ON the device (TV, DVD, VCR, etc.) you wish to program. 2. Press & Hold the Device button (TV, DVD, VCR, etc.) you wish to program for approximately 3 seconds until the Indicator Light (on the POWER button) turns ON and stays lit. -
Page 4: Brand Name Search Programming
BRAND NAME SEARCH PROGRAMMING If the brand name of your device is listed in the Brand Name Code list below you may be able to program your remote by searching through only the Code Lists for that specific manufacturer. If your brand name is not shown in the list below, use one of the other programming methods described in this manual. -
Page 5: Manual Code Search Programming
1. Turn ON the device (TV, DVD, VCR, etc.) you wish to program. 2. Refer to the Brand Name Code List. Note the corresponding Number for the Brand & Device you wish to program. For example to program a RCA TV the correct number button is “1”... -
Page 6: Automatic Code Search Programming
1. Turn ON the device (TV, DVD, VCR, etc.) you wish to program. 2. Press the Device button (TV, DVD, VCR, etc.) for device you wish to program. The Indicator Light on the POWER button will flash once. 3. Press & Hold the SET button for approximately 3 seconds until the Indicator Light turns ON and stays lit. -
Page 7: Code Retrieval
7. Turn your device back ON and confirm if the remote correctly controls the other main functions (Volume, Play, Pause, Menu, Directional Arrow Buttons, etc.) for your device 8. If the remote is not controlling the main functions of the device repeat Steps 1-6 until you find another code which turns your device OFF. - Page 8 REMOTE CODES BEING USED DEVICE REMOTE CODE DEVICE REMOTE CODE AUDIO CABLE...
- Page 9 We warrant this product to be free from defects in material and workmanship under normal use for a ninety-day period from the original date of purchase from an authorized VIDAO dealer. Should you be missing any of the included accessories or other components (screws, pieces, etc.), please contact the Customer Support Center to secure a replacement.
Need help?
Do you have a question about the V7 and is the answer not in the manual?
Questions and answers
How to program remote
To program the Vidao V7 universal remote, follow these steps:
1. Turn on the device (TV, DVD, VCR, etc.) you want to program.
2. Press the corresponding Device button (TV, DVD, VCR, etc.). The Indicator Light on the POWER button will flash once.
3. Press and hold the SET button for about 3 seconds until the Indicator Light turns on and stays lit, then release the SET button.
4. Point the remote at the device and press & release the CH+ button repeatedly until the device turns off.
5. When the device turns off, turn it back on and check if the remote controls it correctly.
If no button is pressed for 30 seconds during programming, the remote will exit programming mode.
This answer is automatically generated
tengo un tv philips y un control vidao pero no se como configurar el control me ayudan