Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt within this service information by anyone else could result in serious injury or death. Philips BDL46xxE...
A leakage current tester may be used in the above hot check, in which case any circuit measured must not exceed 1 milliamp. In the case of a measurement exceeding the 1 milliamp value, a rework is required to eliminate the chance of a shock hazard. AC VOLTMETER 0.15u 1500 To Metal Parts Earth Ground Philips BDL46xxE...
Power consumption Sleeping mode: Less than 1W Size (w/o packing) Width: 1122.0 mm, Height: 704.6 mm, Depth: 405.1 mm Net Weight 31.1 kg Operating temperature: 5 ~ 40°C, Humidity: 20-80% Environmental conditions Storage temperature: -20 ~ 60°C, Humidity: 10-90% Philips BDL46xxE...
Page 7
TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ TMDS Clock Shield TMDS Clock- Reserved (N.C. on device) DDC/CEC Ground +5V Power Hot Plug Detect 2.3 4-pin S-VIDEO connector Signal Y (Luminance) C (Chroma) Philips BDL46xxE...
Page 8
To output the audio signal from the AUDIO IN 1, 2 and 3 jack. EXTERNAL CONTROL (mini D-sub 9 pin) Connect the IN connector with the RS-232C OUT connector of the computer or a multi-connected BDL46xxE monitor. Connect the OUT connector with the RS-232C IN connector of BDL46xxE monitor. VIDEO IN/OUT VIDEO IN connector(BNC and RCA): To input a composite video signal.
Page 9
ASIC automatically computes the correct A/D response so that a Win98 “SHUTDOWN” or “ALL” Display Mate “MOIRE” Patterns are correctly displayed. Most critical on the panels “NATIVE”; No ‘unstableness’ of the image shall be observed. Definition of “HD Compatibility”: All HD timings have to work through YPbPr, HDMI, and RGB. Philips BDL46xxE...
On Mode Power saving (when no OSD) ON Schedule Standby Blinking(500mSec) Fan defect mode Blinking(500mSec) Depends on SET condition Factory mode * Note: Panel performance characteristics “ MUST BE” met in all display modes/inputs at standard test conditions. Philips BDL46xxE...
Page 13
All audio/video and other output controls shall be performed by using an On Screen Display (OSD) via a Remote Control Unit in conjunction with the front panel controls. The following tables list the OSD functions supported by BDL46xxE. Level 1...
Page 14
DATE AND TIME YEAR MONTH HOUR MINUTE DAYLIGHT SAVING CURRENT DATE TIME SCHEDULE ITEM ON TIME HOUR:MINUTE OFF TIME HOUR:MINUTE INPUT EVERYDAY EVERYWEEK MONITOR ID DDC/CI ON/ OFF HEAT STATUS SMART POWER OFF(LOW)/ MEDIUM/ HIGH ADVANCED OPTION RESET NO/ YES Philips BDL46xxE...
4. JRC NJW1141 Audio Processor The NJW1141 is a sound processor includes all of the functions required to process the audio signal for TV, such as tone control, balance, volume, mute, and AGC functions. All of the internal status and Philips BDL46xxE...
Page 16
There is also a series with input clamp and one without, allowing support for a range of video signals, not just composite signals. 11. EtronTech EM636165TS-5G SDRAM The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is Philips BDL46xxE...
Page 17
The AT24C32A/64A is available in space saving 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead Mini-MAP (MLP 2x3) and 8-lead TSSOP packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) versions. Philips BDL46xxE...
CHAPTER 6 LAYOUT SIDE VIEW Index of this chapter: 1. Button board 2. Daughter board 3. LED board 4. Main board 5. Power board 1. Button board 2. Daughter board 3. LED board Philips BDL46xxE...
CHAPTER 8 TROUBLE SHOOTING Index of this chapter: 1. Remote No Function 2. Button key No Function 3. No Image appear 4. No Audio 1. Remote No Function 2. Button Key No Function Philips BDL46xxE...