Related Manuals for Mark Fitness XM-4419
Summary of Contents for Mark Fitness XM-4419
- Page 1 XM-4419 FID BENCH with LEG & PREACHER Owner’s Manual Read all precautions and instructions in this manual before using this equipment. 8/09...
-
Page 2: Table Of Contents
Table of Contents Important Safety Information Assembly 5-11 Parts List Exploded View Warranty Information... - Page 3 7501 Trammel Drive Shreveport, LA 71108 QUESTIONS? CALL 1-800-719-4605 Monday-Friday 8:30 a.m.-5:00 p.m. XMARK FITNESS SERIES (Central Standard Time) MODEL: XM-4419 When calling please have the following product information available: Model Name : XM-4419 Date Mfg.: Serial # Model Name Decal Location...
-
Page 4: Important Safety Information
Important Safety Information NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre- existing health problems. -
Page 5: Assembly
Assembly NOTE: Hand tighten bolts and locknut until machine is fully assembled. STEP 1 Attach the U-Shaped Front Base (2) to the front part of the Main Frame (1), and secure with three M10 washers (39), three M10X15 Allen Bolts (31). Insert the Rear Base (3) into the rear part of the Main Frame (1) with two M10X15 Allen Bolts (31) and two... - Page 6 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 41 39 STEP 3 Push two Spacers (23) into each Seat Supports (6). Attach one Backrest Support (7) to one Seat Support (6). Align the holes with one M10X45 Allen Bolt (32) and one M10 Washer (39).
- Page 7 Assembly NOTE: Hand tighten bolts and locknuts until machine is fully assembled. STEP 4 Connect the Sliding Block (9) and the Backrest Supports (7) with one M10 x160 Allen Bolt (35), two M10 Washers (39) and one M10 Lock Nut (41).
- Page 8 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 5 Push two Spacers (23) into the Seat Adju- stment Bracket (8). Attach the Seat Adjustment Bracket (8) to the Seat Supports (6) with M10X205 Allen Bolt (36), two M10 Washers (39) and one M10 Lock Nut (41).
- Page 9 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 7 Connect the Seat Supports (6) and the Seat Adjustment Bracket (8) with one M10 x 120 Allen Bolt (34) and one M10 Lock Nut (41).
- Page 10 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 8 Attach the Curl Pad (21) to the Arm Curl Stand (17) using two M10X15 Allen Bolts (31). Insert Arm Curl Stand (17) into the Main Frame (1) and secure in place using the Locking Pop Pin (20).
- Page 11 (13) to the weight tube on the Leg Lift Bar (5) using the set screw (pre-assembled). Make sure the set screw is on the bottom of the sleeve. Secure the weight plates (not included) with the 2" Spring Clip (19). Congratulations! You have completed assembly of you XM-4419!
-
Page 12: Parts List
Parts List XM-4419 Parts List Key NO. Part No. Description Main Frame 204056202503 U-Shaped Front Base 204043401503 204043402503 Rear Base 204043418503 Arm Curl Handle Leg Lift Bar 204056101503 Seat Support 204043405503 204056201503 Backrest Support 204043407503 Seat Adjustment Bracket Sliding Block... -
Page 13: Exploded View
Exploded View... -
Page 14: Warranty Information
XMARK Fitness 7501 Trammel Drive Shreveport, LA 71108 Customer Service: 1-800-719-4605...
Need help?
Do you have a question about the XM-4419 and is the answer not in the manual?
Questions and answers