THANKS General Instructions We at Kasco Marine, Inc. would like to both thank and congratulate you on your purchase of the xStream fountain. INSPECT THE SHIPMENT We appreciate you choosing Kasco and for your purchase. Immediately inspect your Kasco Fountain shipment for any Your decision to purchase Kasco’s xStream Fountain will...
Kasco Fountains are lightweight, energy efficient, and easy to install and operate. We strive to produce products that exceed customer expectations. We hope you enjoy your Kasco Fountain.
Assembly 1. Make sure you have all the parts needed. If any shortages are found, contact your Kasco representative immediately. 2. Place float on motor housing. The power cord notch on the float should line up with the cord. See diagram below of bottom side of float.
7. Make sure the cord is coming out of the notch in the float before attaching the screen to the float. All other nozzle options require the following assembly: 1. Place the flow straightener in the fountain tube making sure it rests securely against the tube and the holes line up.
oring Important: Push in black plugs on the inside of the nozzle only. Plugs on Inside 3. Prepare the nozzle before installing using the nozzle choice chart. Different patterns are created by plugging or removing plugs from the inside holes in the nozzle.
NOTE: Pattern sizes listed are approximate. by sinking them further below the surface. Variations in voltage caused by regional electrical differences or voltage drop due to long power cords may result in reduced pattern sizes. 4. After the nozzle is prepared, attach it to the flow straightener in 4 places using #6 x 1/2”...
TIMER-OPERATION INSTRUCTIONS days. C-25 Control Box will turn the aerator/fountain ON & OFF with the TIMER. Kasco lights will turn ON with the Any unauthorized modifications to this control panel will PHOTO EYE and OFF with TIMER. C-25 Control Box is void the UL listing and the Kasco warranty.
** the sun and cool, but above 32 F. It is not necessary to store Kasco motors upside down. All internal seals ** Please keep the original box for maintenance ship- are fully lubricated while stored in an upright position.
(except for www.kascomarine.com the ropes, power cord, and propeller) under normal Kasco Marine will have a record of the purchase and use and service. The Kasco Marine, Inc. obligation will be able to determine whether or not the unit still under this warranty is limited to replacing or repairing caries warranty coverage.
Kasco Marine does estimates on repairs at the request This symptom is also caused from unit being of the customer. The request for estimate should be clogged with debris.
Page 17
This indicated a problem with the Starting Capacitor. Each Kasco Fountain is equipped with a Starting Capacitor to get the unit going when it is first plugged in. If it is operating, but not spinning and can...
Replacement Parts 2400SF REPLACEMENT PARTS ITEM PART TORQUE DESCRIPTION QTY. NUMBER VALUES 140112 PUMP HOUSING, LOWER PROP, 1/2HP, HIGH SPEED 361110 HAND TIGHT FOUNTAIN DISC, 1/2HP, HIGH SPEED 361115 FOUNTAIN 361500 FLOAT, 1/2 HP 251300 FLAT WASHER, 1/4" 840537 LOCK WASHER, 1/4" 1/4-20 X 3-1/4 PHIL PAN 251200 HEAD...
3 years depend- ing on use. • Address your Repair to Kasco Marine, Attn: Repairs (or to your Authorized Repair Center. • Shipping to Kasco or an Authorized Repair Center is paid for by the customer.
Also fill in the information below and keep for your records. Model # (Ex. 2400SF)_______________________________ Serial # (Ex. 2101S241025)______________________________ Purchase Date:_____________________ Purchased From:___________________________________ Registration Date: ___________________________ Kasco Marine, Inc. 800 Deere Rd. Prescott, WI 54021 Phone (715) 262-4488 * Fax (715) 262-4487 www.kascomarine.com * sales@kascomarine.com 884361...
Need help?
Do you have a question about the xStream 2400SF and is the answer not in the manual?
Questions and answers