Draytek VigorAP 910C User Manual page 74

Packet-OVERDRIVE
Mac Clone
After finishing this web page configuration, please click OK to save the settings.
A d d a
A d d a
To add a new wireless profile for the stations, click Add. The following dialog box will
appear.
VigorAP 910C User's Guide
selected profile.
This feature can enhance the performance in data transmission
about 40%* more (by checking Tx Burst). It is active only when
both sides of Access Point and Station (in wireless client) invoke
this function at the same time. That is, the wireless client must
support this feature and invoke the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for matching
with Packet-OVERDRIVE (refer to the following picture of
Vigor N61 wireless utility window, choose Enable for
TxBURST on the tab of Option).
Check this box and manually enter the MAC address for Station
mode driver.
N e w W i r e l e s s P r o
N e w W i r e l e s s P r o
f i l e
f i l e
64