Table of Contents
Advertisement
AM tuner section
Tuning range
Area code
Tuning scale
10 kHz step 9 kHz step
SA
530 kHz –
1,610 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
General
Power requirements
Area code
Power requirements
SA
230 – 240 V AC, 50/60 Hz
Power consumption
Area code
Power consumption
SA
220 W
Power consumption (during standby mode)
0.3 W
Dimensions (width/height/depth) (Approx.)
430 × 145 × 306 mm
including projecting parts
and controls
Mass (Approx.)
7.6 kg
Speaker section
• Front speaker (SS-MSP2500)
Speaker system
2-way, Bass reflex,
Magnetically shielded
Speaker unit
Woofer:
160 mm, cone type
Tweeter:
25 mm, horn type
Rated Impedance
6 ohms
Dimensions (width/height/depth) (Approx.)
230 × 905 × 285 mm
(with foot)
Mass (Approx.)
11 kg
• Subwoofer (SS-WP3000)
Speaker system
Speaker unit
Rated Impedance
Dimensions (width/height/depth) (Approx.)
531 kHz –
1,602 kHz
Mass (Approx.)
Supplied speakers
• Front speaker (2)
• Subwoofer (2)
Supplied accessories
Operating instructions (this manual)
Quick Setup Guide (1)
FM wire antenna (1)
AM loop antenna (1)
Coaxial digital cord (1)
Speaker cords
• Short (2)
Foot pads
• Subwoofer (8)
Remote commander (RM-AAU059) (1)
R6 (size-AA) batteries (2)
For details on the area code of the
component you are using, see page 2.
Design and specifications are subject to
change without notice.
Halogenated flame retardants are not used in the
certain printed wiring boards.
Bass reflex, Magnetically
shielded
200 mm, cone type
10 ohms
275 × 345 × 305 mm
(with foot)
5.8 kg
43
GB
Advertisement
Table of Contents
