^ The ground lead must be connected
to the screw connection point
(marked with the ground symbol 8) at
the back of the machine.
The machine must only be operated
with the voltage, frequency and
fusing shown on the
located on the rear of the machine,
and on the plinth (behind the service
panel).
The
is secured to the inner
side of the service panel.
^ Remove the fixing screws, a, from
^ Hold the service panel at both sides
^ Unscrew the facing, b. Remove the
^ See the supplied installation diagram.
^ Refit the plastic protective cap,
and the
Disconnect the machine from the
main electrical supply.
the service panel.
and pull upwards.
plastic protective cap.
facing and service panel in the
reverse order to which they were
removed.
59