Hardware Overview; Front View - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260

Hardware Overview

Front view

There are 6 indicator lights located at the top right-hand corner
of your router. See the icon descriptions below to understand
what each light indicates.
Power
 Solid Green. Router is powered on.
 Solid Red. Firmware is upgrading.
 Off. Device is powered off or factory reset
button was held down for more than 15s.
Indicator lights
Chapter 1: Product Overview
USB
 Solid Green. Storage or printer device is
connected by USB.
 Flashing Green. USB storage device is in
use.
 Off. No devices are connected by USB.
 Solid Green. WPS (WiFi Protected Setup) is
WPS
enabled and ready for use.
 Flashing Green. WPS Push Button pairing is
in progress.
 Off. WPS (WiFi Protected Setup) is disabled.
(Default. To enable, login to Web GUI).
Wireless
 Solid Green. Wireless network is ready.
 Flashing Green. Transmitting or receiving
wireless data.
 Off. Wireless network is disabled.
 Solid Green. Connected to least one LAN
LAN
(Local Area Network) Ethernet link.
 Flashing Green. Transmitting or receiving
data over LAN Ethernet.
 Off. No LAN Ethernet links.
 Solid Green. Device has a WAN Internet IP
Internet/WAN
address and is ready to use.
 Solid Red. Device has a Wide Area Network
(WAN) Ethernet link, but no WAN IP address.
 Flashing Green. Transmitting or receiving
data over WAN Ethernet link.
 Off. Device has no WAN Ethernet link.
4