Table of Contents
Advertisement
CONVERSION TO NATURAL GAS
OR LPG
REPLACING THE BURNER INJEC-
TORS
•
Remove the pan-supports, the burner
covers and the knobs;
•
Using a wrench substitute the injec-
tors "J" (Figs. 5.3 - 5.4) with those
ones suitable for the type of gas for
which it is to be used.
The burners are conceived in such a
way so as not to require the adjustment
of the primary air.
REGULATING THE BURNER MINI-
MUM SETTING
When changing from one type of gas to
another, the minimum tap output must also
be correct, considering that in this position
the flame must be about 4 mm long and
must remain lit even when the knob is tur-
ned sharply from the maximum to the mi-
nimum position.
The adjustment is performed with the bur-
ner lit, as follows:
•
Turn the knob to the minimum posi-
tion.
•
Remove the tap knob.
•
Turn the screw "
ting with a screwdriver.
For LPG, tighten the adjustment screw
completely.
A" to the correct set-
J
A
J
Fig. 5.3
Fig. 5.4
Fig. 5.5
19
Advertisement
Table of Contents
