Ventilation Grill; Before Installation - Miele KFN 9755 IDE Operating And Installation Instructions

Ventilation grill

During construction the ventilation grill
can be built-in.
^ Cut an opening into the plinth
shown in the illustration above.
^ Place the ventilation grill
cut-out.
^ Slide the clips
the ventilation grill until the hooks
connect with the plinth.
^ Install the plinth with the inserted
ventilation grill.
, as
into the
, from the back, into

Before installation

^ Remove the cover strip, the sealing
strip and other accessories from the
inside and from the exterior rear wall
of the appliance.
^ Do not remove the spacers from the
rear wall of the appliance. They
ensure that there is enough space
between the rear wall of the
appliance and the wall.
^ Remove the cable clips from the rear
of the appliance.
^ Remove the red transport fixing
and use the supplied plug
the empty hole.
^ Check that all the parts on the rear
the appliance can move freely. Bend
any parts carefully if needed.
Installation
,
to close
43