Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
behind the door set as low as possible.
However, if the door is opened, or a
setting is changed or the alarm is
sounding, the temperature display
behind the door will appear much
brighter for approx. 1 minute.
The brightness level of this display can
be adjusted:
^ Press and hold the SuperFreeze
button for approx. 5 seconds.
The SuperFreeze indicator light will
;
flash and a
will flash in the
temperature display.
^ Press one of the temperature selector
buttons repeatedly until
the display.
^ Press the SuperFreeze button again.
^
lights up in the display.
^ You can now adjust the brightness
level by pressing the temperature
selector buttons. You can choose
from settings 1 to 5:
1: lowest setting,
5: brightest setting.
^ Press the SuperFreeze button to save
the setting.
Selecting the correct temperature
^ To exit the setting mode, press the
^
appears in
freezer section On/Off button.
If you do not do this, the electronics
will revert to normal operation after 2
minutes.
21