Frequently Asked Questions - Miele H 4242 B Operating And Installation Instructions

Frequently asked questions

What if the oven does not heat?
Possible fault
The circuit breaker has tripped.
The delay start has been set.
The temperature has not been set.
Why is a noise heard after turning the oven off?
This is normal. The fan will continue to run for a short time to cool the oven. When
the oven has cooled sufficiently, the fan will turn off automatically.
Why is the display dark when the oven is first turned on?
Possible fault
The clock display has been turned off. Turn the display on. See "Settings" -
What if there has been a power cut and instead of the time of day, "I2:00"
and triangle V underneath the m symbol are flashing in the clock/timer
display
Possible fault
All pre-set times have been deleted
because of the power cut.
What if cakes and cookies are not cooked enough?
Possible fault
The grease filter was not removed.
Why is there uneven browning?
Possible fault
Oven not preheated.
Oven temperature too high.
Grease filter was not removed.
Shiny or thin pans were used.
42
Solution
Check the breaker.
Cancel the delay start.
Set a temperature.
Solution
"Time of day display (P I)".
Solution
Enter the time of day again, and any
other pre-set data.
Solution
If the grease filter is not removed,
increase baking by 10 to 15 minutes.
Solution
Allow the oven to preheat.
Lower the oven temperature.
Remove the grease filter next time.
Use dark, matte finish pans.