Coupling Seal - Miele DG 2351 Operating And Installation Instructions

Coupling seal

If the water container becomes difficult
to remove and replace, you will need to
lubricate the seal. Rub a small amount
of the silicone grease supplied (see
"Accessories supplied") into the inside
of the seal. When doing this, do not
detach the seal but leave it in place.
When handling silicone grease, please
observe the following safety measures:
– Remove any silicone grease from
your skin either by wiping it off or by
washing it off.
– If the grease gets into the eyes it
must be rinsed out with plenty of
clean water.
– If it is swallowed, seek medical
advice.
Cleaning and care
The coupling seal should be replaced
with a new one if it becomes brittle or
porous over time or if an unusually
large amount of water collects on the
floor of the water container
compartment.
Only use the silicone grease
supplied. On no account must
margarine or oil or any other
domestic grease or fat be used, as
these can cause the seal to swell.
Coupling seals can be ordered from the
Miele Spare Parts Department.
49