Table of Contents
Advertisement
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Maintenance
The only maintenance required for the BedJet is periodic replacement of the HEPA filter and
periodic cleaning of the washable HEPA pre-filter.
HEPA PREFILTER CLEANING: Clean the HEPA lifetime washable pre-filter every 2 months or
when visually dirty. Press the round BedJet logo on top of the BedJet unit and pull air intake grill
open to access filter, remove the black mesh filter from HEPA filter (it is attached to front of)
HEPA filter with Velcro) and clean under running water. Reinstall filter when dry and close the
air intake grill until it snaps back in place.
HEPA FILTER REPLACEMENT: The HEPA filter is recommended to be replaced every 400 hours
or every 6 months of regular use. The BedJet contains a HEPA filter service clock. At 400 hours
the BedJet will give a service alarm notification via rolling green LED on the air flow indicated
accompanied by beeping when in standby.
HEPA FILTER SERVICE ALARM RESET: Turn BedJet off. Hold down the hourglass button on the
remote control while simultaneously turning the BedJet on. Continue holding hourglass button
down on remote until BedJet power light indicator comes on. HEPA filter service alarm should
now be reset for an additional 400 hours. The service alarm can also be reset from the
Bluetooth App.
Revision 1.0
IMPORTANT INSTRUCTIONS
Press logo button to release front
air grill for easy access to HEPA
pre-filter and filter
P a g e | 11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 1222NA and is the answer not in the manual?
Questions and answers