Olivon Qian Series Manual

MANUFACTURING GROUP LTD
*These are only a few selected models from the Qian Series brass telescopes.
Congratulations on your purchase of an Olivon Qian Series brass telescope! This
sophistacated brass telescope was designed by one of China's nest telescope
manufacturers. The name "Qian" was taken from "Zhang Qian" who was a famous
explorer and o cer that explored Central Asia during the 2nd century BCE.
A) Telescope Mount & Tripod Legs
The telescope mount, legs, screws, bolts and nder scope accessories (type 2
model) will be packaged into one box. Be careful when you unpack your items, as
some items may be small and easily overlooked. We recommend that you keep all
original packaging in the event you need to store the telescope or return it for
warranty repair.
Assembly should take about 25 minutes. We suggest you have a second person to
aid you, as the tripod and mount pieces can be cumbersome and heavy. You will
need a small Phillips-head screwdriver and a 5/8" wrench.
1. Gently lay the optical tube and mount on its side. Attach the tripod legs one at a
time to the base of the mount, but rst lining the holes on the top of the tripod
with the holes on the base of the mount. Place a brass washer on either end of the
leg attachment shaft. Then thread an acorn nut on both sides of the threaded shaft.
www.olivonmanufacturing.com
1
Qian
Type 1
Type 2