Un)Install Usb Drivers; Install Usb Drivers - MUTOH Kona User Manual

3.1

(Un)Install USB drivers

Before you will be able to work with Mutoh's Kona cutting plotter compatible software, a
connection between your workstation and the Kona cutting plotter should be made.
In case your computer already has an earlier USB driver installed, please uninstall it
and reinstall the driver.
Refer to
(Un)Install USB drivers on page 29
3.1.1

Install USB drivers

Download the latest drivers from
Step 1:
Unpack the driver package.
Step 2:
Make a connection between the cutter and your computer using a USB cable.
Step 3:
Power ON the cutter and computer.
Step 4:
Note
When working in a Windows Vista or 7 environment, it might be possible that

the drivers will be installed automatically. If the installation is not correct or is
does not run automatically, continue with his procedure.
Your computer shows an error when auto installing
Step 5:
AP-75380 - Revision 1.2
User's Guide Kona cutting plotter
> window drivers.
Mutoh's member Site
Basics
3
21