Oberheim XK Owner's Manual page 16

ZONES
Setting The Key Transpose
TlfomnVJthe ^f0W SWitCheS Until the Ied next t0 Transpose Is on. Select the key transpose
value (00-12 each increment is a semi-tone) with the keypad. Note: If you are holding any note
down while changing the value, the new note will not be sent until the key Is released and then
played This prevents regating the external device until you expect it. In the example below the
current Zone is transposed up a major fifth. ■
Setting MIDI Mono
Whfn nnr!?h *? FT S,WllCheS Until lhe Le'd next t0 MIDI Mono ls on- Select 1 for on, 0 for off
When ON the first noe, played will be sent on the basic MIDI Channel, the second note played will
*?nn °"the *** M'DI channel +1, the third note will be sent on basic MIDI channel +2, and so
S^ df Zte:L^ne'Se[{]n9 ^ LM ** *" ^ h the eXampIe bel°W' MIDI
(press)
MIDI MONO
(keypad) (g (display)
»«^^^
Setting Pressure
SWltC!ieS untH the Le>d- next t0 Pressure ls on- Select 1 for on, 0 for off
psure is sent on the MIDI Channel for this Zone. When off pressure
information is not sent. In the example below, pressure is sent for the currently selected Zone
(press)
PRESSURE
(keypad) (enter)(dlSplay)
1
12