Triton RL1600 User Manual page 46

Automated teller machine
Hide thumbs Also See for RL1600:
Table of Contents

Advertisement

Read this page BEFORE proceeding. New imperative information.
BOTH types of electronic locks are now set with a Super Master Reset Password. The Super Master Reset
Password should only be used if the Manager Password has been lost/forgotten. Using the Super Master Re-
set Password will reset the lock back to factory state however once the Super Master Reset Password has been
changed from the factory default code, it CANNOT and WILL NOT change unless a hard reset of the lock is
performed.
*Upon arrival, the Super Master Reset Password combination of the lock is set at 5-5-5-5-5-5-5-5.
Change this password IMMEDIATELY, before the Manager Default Code, or this function will be
To Change the Super Master Reset Password (SMR):
1. Press and hold the ZERO (0) for three (3) seconds.
2. The lock will beep twice and the LED light will come ON (and stay ON until the process is complete).
3. Enter the default code of 5-5-5-5-5-5-5-5 holding the last digit for three (3) seconds.
4. The lock is now in Command Menu mode. SMR has two (2) Command Options:
- Press zero (0) to Change Code (one-time use ONLY).
- Press eight (8) to Reset the Manager Password (reset the lock).
5. TO BE CONTINUED - - - - - - - - - More info from La Gard needed
** IMPORTANT **
Super Master Reset Password
That is EIGHT number 5s.
permanently lost.
A
C
PPENDIX
C2

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RL1600 and is the answer not in the manual?

Questions and answers

Table of Contents