Do you have a question about the 1400 and is the answer not in the manual?
Questions and answers
Summary of Contents for Blagdon 1400
Page 1
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 1 Established over 40 years ago, Blagdon are committed to producing a comprehensive range of high quality, easy to use, pond inpond equipment. An ongoing programme of research development ensures excellent performance and value for all all-in-one their customers.
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 3 CONTENTS Getting to know your Inpond Parts descriptions / spares codes - with exploded diagram Technical specifications inpond Pump performance / flow chart Installation Electrical installation all-in-one Installing Inpond 6, 7 & 8 Installing UVC 9 &...
Page 3
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 5 GETTING TO KNOW YOUR INPOND GETTING TO KNOW YOUR INPOND Part Description Spare Code Filter body UVC Contact chamber Polymer wool pad 1051166 Polymer wool cartridge Medium foam 1051170 Coarse Foam...
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 7 INSTALLATION GETTING TO KNOW YOUR INPOND Electrical installation Part Description Spare Code The power supply must meet the specifications on the product. PL 5W UVC lamp 1041041 The pump is intended to be used with either a weather-proof...
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 9 INSTALLATION INSTALLATION Locating your Inpond All-in-One CONVENIENT INSTALLATION The Inpond pump and filter should be located on a firm and level base in the The Inpond All-in-One can be installed either powering a waterfall or pond/water feature in a depth of at least 10cm, but no more than 1.25m.
The Blagdon Inpond All-in-One pump is centrifugal with a magnetic impeller We recommend that Blagdon smooth bore clear hose or Blagdon heavy duty movement driven by a watertight synchronous motor. They require minimum smooth bore black hose are used.
Foams may be cleaned vigorously in a bucket of pond water. Inspect the UVC cap and Quartz sleeve for water leaks. Adding Blagdon Bio Start after filter maintenance will help replenish these If there are no signs of leakage reverse the procedure ensuring that the beneficial bacterial populations and is highly recommended during the first Cover O-ring is in place.
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 15 UVC ELECTRICAL INSTALLATION UVC ELECTRICAL INSTALLATION WARNING - A Residual Current Device (RCD), also known as the Residual Current Circuit Breaker (RCCB), with a tripping current not exceeding 30mA must be installed in the supply circuit. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the wiring.
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 17 MAINTENANCE & CLEANING MAINTENANCE & CLEANING LED Automatic Photo Sensor Polymer wool cartridge - detects when light levels are low/dusk The LED automatic sensor is positioned “ hose fitting on top of the motor body between the...
• Check that the UVC O-ring have been correctly assembled and that it is hand tight. If none of the above works contact Interpet (Blagdon) Consumer Advice Department (See Faults problem procedure Page 20). • PTFE tape may be needed to give a water tight seal and should be applied...
• You consult the Consumer Advice Line and follow any advice to correct the situation. See details below. • Check all fuses / RCD and electrical connections follow electrical Refunds can only be authorised by Interpet Blagdon. installation (pages 11 & 12). CONSUMER ADVICE CONTACT DETAILS...
Blagdon Inpond with UVC AW v2.qxd 22/12/10 14:34 Page 23 GUARANTEE This product is guaranteed against defects in material and workmanship for 2 years from the date of purchase, under normal usage. The guarantee DOES NOT APPLY in case of improper use, negligence, lack of maintenance or accidental damage to either the filter or UVC.
Need help?
Do you have a question about the 1400 and is the answer not in the manual?
Questions and answers