Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MicroBoards Technology CWR-424-52
Summary of Contents for MicroBoards Technology CWR-424-52
- Page 1 CWR-424-52 CD Duplicator USER’S MANUAL www.microboards.com Version 2.0...
-
Page 2: Table Of Contents
CWR-424-52 Microboards Technology LLC Table of Contents System Overview ...3 Advanced Features: ... 3 Unpacking your system Setting up the CWR-424-52 duplicator Copy Process ...4 Using Audio Masters: ... 4 Write Speeds:... 5 Speed Table ... 5 Copy Job Completes ...6... -
Page 3: System Overview
The CWR-424-52 automatically detects the format of the master CD and the four recorders write at a blazing 52x speed to allow for high volume duplication. Features of the CWR-424-52 include a recording simulation mode to ensure your master can be copied safely. A simple, two-button interface allows the recording speed to be adjusted to slower speeds for use with media not certified for high-speed duplication. -
Page 4: Setting Up The Cwr-424-52 Duplicator
Copy Process The advantage of the CWR-424-52 is the quick and easy operation to burn CD information. You can burn CD-R’s by pressing the button only once with the CWR-424-52 as follows;... -
Page 5: Write Speeds
CWR-424-52 Microboards Technology LLC analyze the master. The reader drive will blink slowly during this process. Write Speeds: • FAST – It copies at maximum speed of 52x*. Status • MEDIUM – It copies at 40x*. Status • SLOW - It copies at 8x*. -
Page 6: Copy Job Completes
The Master disc does not eject. You can use any or all of the four recorders to make copies. The CWR-424-52 ALARMS (beeps) when an error occurs with the media and/or drive. Discs will not be ejected and the error alarm beeps until you press the open tray button on the drive(s) that have failed. -
Page 7: Meaning Of Led's
CWR-424-52 Microboards Technology LLC Meaning of LED’s Listed below are the different states of the Status LED’s These indicate the status of the CWR-424-52 system. Light off Slow blink Copy Mode Process Status Status Status Status Status Light on Quick blink... -
Page 8: Error Display During Copying
CWR-424-52 Microboards Technology LLC Error Display during Copying Status Status Status Status Status A repeating “long beep”, indicates an error reading the Master disc. The Master disc is Mode unreadable. Try using another master disc. A repeating “long beep”, indicates the CD-R disc in the recorder drive is not blank. -
Page 9: Test Copy Mode Process
CWR-424-52 Microboards Technology LLC Test Copy Mode Process Status Status Status Status Test Mode complete (fast speed). Test copying process between 31%~60% Mode complete. Test copying process between 61%~100% Mode complete. Test copy complete. A single “short beep” indicates the test is complete. The controller Mode returns to the status shown in figure 1 on page 7. -
Page 10: Error Display During Test Copying
CWR-424-52 Microboards Technology LLC Error Display during Test Copying Status Status Error Display in Additional System Modes Status A repeating “long beep”, indicates an error reading the master disc. Try using another Mode master disc. A repeating “long beep”, indicates an error with the blank CD-R disc. -
Page 11: Specifications
CD-DA , Mixed Mode, ISO9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA Form1/form2 , HFS, UFS,CD-EXTRA (CD-PLUS) Firmware Update Occasionally it may be necessary to load new or updated firmware on to the CWR-424-52 duplicator. You will be sent a CD containing the firmware program.
Need help?
Do you have a question about the CWR-424-52 and is the answer not in the manual?
Questions and answers