Table of Contents
Advertisement
Durable gear ass'y
The service life of the gear ass'y is 2 times longer than the conventional models thanks to the new greasing
method; vacuum-impregnation of lubricate grease into the holes on the sintered gear, in addition to the
conventional greasing.
Low gear noise
The gear festening method is changed from the conventional press-fitting method to the new method. The
gear is fastened to the spindle by a woodruff key keeping a proper clearance to reduce the variations in gear
noise level to the minimum level.
5. SPECIFICATIONS
Item
Depressed
Dimensions
center
wheel
Max. peripheral speed
Power source
Voltage, current and power input
Rotation speed (no-load)
Type of motor
Type of switch
Enclosure
Housing
Tail cover
Gear cover
Packing gland
1
Net: *
Weight
Gross:
Packaging
Standard accessories*
*
1
: Net weight excludes cord, depressed center wheel, wheel nut, wheel washer and wheel guard.
2
*
: Standard accessories are subject to change without prior notice.
Model
O.D. 100 mm (4") x Thickness 6 mm (1/4")
Offset amount: 4 mm (5/32")
4,300 m/min (14,100 ft/min, 72 m/s)
AC single phase 50 or 60 Hz
Voltage (V)
220
230
240
12,000/min
AC single-phase commutator motor
Snap switch
Aluminum alloy die casting (metallic
silver) and glassfiber reinforced
polyamide resin (green)
Glassfiber reinforced polyamide resin (black)
Aluminum alloy die casting (metallic silver)
Aluminum alloy die casting
Corrugated cardboard box
2
Depressed center wheel [Outer dia.100 mm (4") ] ................. 1
Wrench ................................................................................... 1
PDA-100G
x I.D. 16 mm (5/8")
Current (A)
6.7
110
3.3
3.2
3.1
1.5 kg (3.3 lbs.)
2.5 kg (5.5 lbs.)
--- 4 ---
G 10SK2
Power input (W)
705
Glassfiber reinforced polyamide
resin (green)
1.4 kg (3.1 lbs.)
2.4 kg (5.3 lbs.)
Advertisement
Table of Contents
