Selecting System Channel Groups; Locking/Unlocking Systems - Uniden UBC3500XLT Owner's Manual

quick key's 2-digit number. To stop scanning the
system(s), press
key) then the number button or buttons again.
The Sx: (system) indicators on the display show the
systems that are currently selected.
To select or lock out a system that is not assigned to a
key, press and hold
control until the desired system is selected. Then,
continue to hold
or unlock the system.

Selecting System Channel Groups

Within a system, you can assign groups of channels to
a group quick key (see "Setting the Group Quick Key"
on Page 50).
Follow these steps to activate or deactivate a channel
group within a system while scanning.
1. Press
Func
then rotate the scroll control to select the
Func
system).
2. Continue to hold
corresponding to the channel group you want to
activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does
not scan even if its quick key is selected.
1. While holding down
to select the system.
2. Continue to hold down
out the system. System Locked appears.
3. Repeat Steps 1 and 2 to unlock a system you
have previously locked. System Unlocked
appears.
(if the quick key is a 2-digit quick
while you rotate the scroll
Func
and press L/O to either lock out
Func
to hold on the system (or hold down
and press the number key
Func
Func
Func
, rotate the scroll control
and press L/O to lock
Basic Operation
33