JVC KW-V420BT Instruction Manual

JVC KW-V420BT Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KW-V420BT:

Advertisement

KW-V420BT
KW-V320BT
MONITOR WITH DVD RECEIVER

INSTRUCTION MANUAL

This instruction manual is used to describe models listed below. Model availability and features
(functions) may differ depending on the country and sales area.
© 2015 JVC KENWOOD Corporation
KW-V220BT
KW-V120BT
B5A-0862-00 (KN/RN)

Advertisement

Table of Contents
loading

Summary of Contents for JVC KW-V420BT

  • Page 1: Instruction Manual

    KW-V220BT KW-V320BT KW-V120BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area. © 2015 JVC KENWOOD Corporation B5A-0862-00 (KN/RN)
  • Page 2: Table Of Contents

    The marking of products using lasers How to read this manual: • Illustrations of KW-V420BT Region 1 are mainly used for explanation. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels.
  • Page 3: How To Reset Your Unit

    BEFORE USE BEFORE USE KW-V420BT Region 1/KW-V320BT Region 1/ KW-V420BT Region 1/KW-V320BT Region 1/ • Do not operate the touch panel using a ball-point KW-V220BT Region 1/KW-V120BT KW-V220BT Region 1/KW-V120BT pen or similar tool with a sharp tip. IC (Industry Canada) Notice...
  • Page 4: Initial Settings

    <User Change the display design. Customize> (Page 51) Finish the procedure. • You can also display the <Clock> setting The Home screen is displayed. screen by touching the clock area on the * Only for KW-V420BT . Home screen.
  • Page 5: Basics

    <Navigation Input> setting (Page 56). level. • Turns off the screen. (Hold) (Page 8) KW-V420BT • Turns on the screen. (Hold) (Page 8) <Radio Data Synchronizes the clock time with 8 M (Eject) button System>...
  • Page 6 BASICS BASICS KW-V320BT 6 Volume +/– button 1 Reset button Adjusts the audio volume. (Page 7) Resets the unit. (Page 3) 7 Monitor panel* 2 Loading slot 3 M (Eject) button 8 Screen (touch panel) Ejects the disc. (Press) (Page 12) * You can change the color of the buttons on the monitor panel.
  • Page 7: Common Operations

    Press + to increase, and press − to decrease. • Holding the button increases/decreases the volume continuously. (Hold) (Hold) To attenuate the sound (only for KW-V420BT ) (Hold) The ATT indicator lights up. To cancel the attenuation: Press the same button again.
  • Page 8: Common Screen Operations

    You can activate the AV function by selecting a Display the pop-up short-cut menu by pressing source on the Home screen. FNC (for KW-V420BT /KW-V220BT /KW-V120BT) or B (for KW-V320BT ) on the monitor panel, then select [Display OFF]. KW-V320BT...
  • Page 9 (Page 12) screen. (Page 52) 4 Returns to the previous screen. button: Displays the <User Customize> KW-V420BT /KW-V220BT /KW-V120BT screen. (Page 51) button: Displays the <Settings> screen. (See the right column.) button: Displays all playback sources and items.
  • Page 10: Selecting The Playback Source

    Selectable only when <iPod Setup> is set to [USB 1 to the rear view camera input. Wire]. (Page 21) 2 Displays the source control screen while playing (Page 35) Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT a video. [Now Playing] Displays the source currently Region 1/KW-V120BT.
  • Page 11: Using The Pop-Up Short-Cut Menu

    Display the pop-up short-cut menu. KW-V420BT KW-V320BT KW-V220BT/ KW-V120BT For KW-V420BT /KW-V220BT /KW-V120BT [Screen Displays the picture adjustment • You can change the items to display on the Home Adjustment] screen. (Page 50) screen. (Page 52) [Display OFF] Turns off the screen.
  • Page 12: Discs

    15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. KW-V220BT KW-V120BT Closing the monitor panel (only for KW-V420BT ) After removing the disc, press M on the monitor Playback information • The information displayed on the screen differs panel.
  • Page 13 ]* to display the other operation button * The appearance of the buttons differs depending on the model: window. [ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ * The appearance of the buttons differs depending on the model: for KW-V320BT .
  • Page 14 DISCS DISCS ❏ Selecting a folder/track on the list ❏ Video menu operations Displays the disc menu (DVD). [ MENU] [T MENU] Displays the disc menu (DVD). You can display the video menu screen during video playback. [Highlight] Switches to the direct disc menu •...
  • Page 15 Randomly plays all tracks. To cancel Repeat/Random playback: Press the button repeatedly until the indicator disappears. * The appearance of the buttons differs depending on the model: [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] for KW-V320BT . ENGLISH...
  • Page 16 DISCS DISCS ❏ Setting items <Down Mix> When playing back a multi-channel Settings for disc playback—<DISC disc, this setting affects the signals Mode> <Menu Select the initial disc menu language. reproduced through the front and/or Language> (Initial: English ) (Page  69) rear speakers.
  • Page 17: Usb

    The appearance of the buttons differs depending on the model: the area shown on the illustration. 6 File type [ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ • To change settings for video 7 Current playback item information (folder no./file for KW-V320BT .
  • Page 18 ❏ Settings for USB playback—<USB ❏ Selecting a folder/track on the list <File Type>* Select the playback file type when a Mode> disc contains different types of files. • Audio: Plays back audio files. • Still Image: Plays back picture files. •...
  • Page 19: Android

    • This unit supports the Android™ application JVC Selects repeat playback mode. Music Play. • 1: Repeats the current track. • When you use JVC Music Play, you can search for • All: Repeats all tracks. audio files by Genre, Artist, Album, Playlist, and •...
  • Page 20 Shows/hides artwork of the Android device—<Android Mode> device. <Android • AUTO MODE: Controls from the Setup> unit (using the JVC Music Play application). • AUDIO MODE: Controls other media player applications from the Android device (without using the JVC Music Play application).
  • Page 21: Ipod/Iphone

    ❏ ❏ Preparation iPod/iPhone iPhone playback—<iPod Mode> ❏ For details about connecting iPod/iPhone, see Display the <System> setting screen. page 63 . On the Home screen: Connect your iPod/iPhone according to your purpose or the type of iPod/iPhone. To listen to music: –...
  • Page 22 5 Playback mode (See the right column.) The appearance of the buttons differs depending on the model: 6 File type [ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ 7 Track no./Total track number for KW-V320BT .
  • Page 23: Apps

    <APP Setup> listening to another source (when using iPod/iPhone) Select [iPhone] for <Navigation Input> beforehand. (Page 56) setup screen (for connection, etc.) appears. Follow KW-V420BT KW-V320BT KW-V220BT/ [ ]/[ Displays the other operation button the settings.
  • Page 24: Pandora

    Pandora® Pandora® (Only for (Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT ) ) Operation buttons Playback operations You can stream Pandora from iPod touch/iPhone [ ]/[ Displays the other operation button or Android devices.
  • Page 25 Pandora® Pandora® ❏ Selecting a station from the list Android™ • You can change the page to display more items by pressing [ • Visit Google play and search for “Pandora” to Display the list selection screen. • The indicator appears on the left of the install.
  • Page 26: Tuner

    • To hide the window, press [ ]/ The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ [AM] Selects the AM band. for KW-V320BT .
  • Page 27: Presetting Stations

    Manual presetting ❏ Selecting a preset station Presetting stations Tune in to a station you want to preset. For KW-V420BT/KW-V220BT/KW-V120BT: ❏ Storing stations in the memory (Page 26) Select the band (1), then display the You can preset 5 stations for each band.
  • Page 28 TUNER TUNER ❏ Activating/deactivating TI Standby FM RBDS features Reception ❏ Searching for FM RBDS programs—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. The unit is in standby to switch to Traffic Information Select a PTY code.
  • Page 29: Siriusxm® Satellite Radio

    SiriusXM® Satellite Radio SiriusXM® Satellite Radio (Only for (Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1 KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1) ) Only SiriusXM® brings you more of what you love When the following screen appears, press Listening to the SiriusXM®...
  • Page 30 [SXM4] The appearance of the buttons differs depending on the model: [ ]/[ Displays the other operation button [ ] or [ ] for KW-V420BT/KW-V220BT/[ ] or [ ] for window. KW-V320BT . • To hide the window, press [ ]/ Only for KW-V420BT/KW-V220BT.
  • Page 31: Selecting A Channel

    SiriusXM® Satellite Radio SiriusXM® Satellite Radio ❏ Replaying content Selecting a channel Replay Display operations buttons for replay. ❏ Selecting a channel on the list You can pause, rewind and replay content from the currently tuned channel. You can obtain information on channels or select a •...
  • Page 32 SiriusXM® Satellite Radio SiriusXM® Satellite Radio SmartFavorites TuneStart™ TuneScan™ User stored channels (P1 to P5) of current band are When you select a SmartFavorites channel, you can When you activate TuneScan™, you will hear 6 recognized as SmartFavorites channels. SiriusXM listen to the current song from the beginning.
  • Page 33 SiriusXM® Satellite Radio SiriusXM® Satellite Radio Display the <Parental Code Check> Enter the four-digit code and then press Setting reception restrictions [Enter] again to confirm the code. screen. ❏ Setting the parental control You can limit access to SiriusXM channels, such as Activating/Deactivating the parental control those with mature content.
  • Page 34 SiriusXM® Satellite Radio SiriusXM® Satellite Radio Selecting the channels to lock—Parental Lock • You can change the page to display more Select a category (1), and then select a Channel Selection items by pressing [ channel (2). • To list all the channels, select [All Channels]. This parental control option allows you to pick the channels to be locked by the parental control •...
  • Page 35: Other External Components

    Display the <Input> settings screen. On the Home screen: [ON] Displays the picture from the rear view • Only for KW-V420BT /KW-V220BT/KW-V120BT : You camera when you shift the gear to the can also display the picture from the rear view reverse (R) position.
  • Page 36 OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS To adjust the picture Display the <Rear Camera> screen. Display the <Rear Camera> screen. (See While the camera screen is displayed... the far left column.) Display the parking guidelines adjustment screen. • The picture adjustment menu is displayed. (Page 50) To close the picture adjustment menu, touch the same area again.
  • Page 37: Using External Audio/Video Players-Av-In

    You can change the AV-IN name displayed on the players—AV-IN ADS adapter—Maestro (Only for “AV-IN” source control screen. KW-V420BT Region 1/KW-V320BT Region 1) Display the <VIDEO Mode> screen. When the operation buttons are You can control the sources from the component via not displayed on the screen, touch ADS adapter.
  • Page 38: Bluetooth

    BLUETOOTH BLUETOOTH Auto pairing Information for using Bluetooth® About mobile phones compatible with Phone When <Auto Pairing> is set to [ON], iOS devices book Access Profile (PBAP) devices (such as iPhone) are automatically paired when If your mobile phone supports PBAP, you can connected via USB.
  • Page 39 BLUETOOTH BLUETOOTH Pairing a Bluetooth device using a PIN code (for Select the unit ( “Car Multimedia”) on your Change the PIN code. Bluetooth 2.0) • If you wish to skip changing the PIN code, go Bluetooth device. Display the <Bluetooth Setup> screen. to step 3.
  • Page 40 BLUETOOTH BLUETOOTH ❏ Connecting/disconnecting a registered Select [ON] (to connect) or [OFF] (to • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed Bluetooth device disconnect) for the target (1), then display when the information is acquired from the device. the <Paired Device List>...
  • Page 41 BLUETOOTH BLUETOOTH ❏ Ending a call ❏ Switching between handsfree mode Using a Bluetooth mobile phone and phone mode While talking... ❏ Receiving a call While talking... When a call comes in... ❏ Adjusting the volume of calls/earpiece/ • Call information is displayed if acquired. microphone •...
  • Page 42 Tone Multi Frequency) function. On the Home screen: From the call history/phone book/preset list For KW-V420BT /KW-V220BT/KW-V120BT : While talking... For KW-V320BT : From the call history (missed calls/ • Only for KW-V320BT : You can also display the...
  • Page 43 • The phone number switches each time [>] is • You can also activate voice dialing by pressed. holding FNC/ (for KW-V420BT /KW-V220BT / Select a phone number to call. KW-V120BT) or HOME/ (for KW-V320BT ) on the monitor panel.
  • Page 44: Using The Bluetooth Audio Player

    The appearance of the buttons differs depending on the model: Playback information Select a preset number to store into. [ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ 1 Tag data (current track title/artist name/album for KW-V320BT .
  • Page 45 BLUETOOTH BLUETOOTH ❏ Selecting an audio file from the menu <Device Shows the device address of the unit. Address> <Auto • ON (Initial): A connection is Connect> automatically established with the last connected Bluetooth device when the unit is turned on. Select a category (1), then a desired item •...
  • Page 46: Settings

    SETTINGS Display the <APP Setup> screen. When selecting [Android/Other c i l On the Home screen: (Bluetooth)] as the device type: Select the iPod touch/iPhone/Android 1), then press [OK] to Before using applications of iPod touch /iPhone/ connect (2). Android such as Pandora, select the device to use. setup screen (for connection, etc.) appears.
  • Page 47: Sound Adjustment

    Turn off the AV source. (Page 8) Selecting a preset sound mode Display the <X’over Network> screen. Display the <Equalizer> screen. • For KW-V420BT/ KW-V220BT/KW-V120BT : Press On the Home screen: FNC and volume + on the monitor panel at the same time.
  • Page 48 SETTINGS SETTINGS ❏ Setting the speakers—car type, Select the speaker type (1), select the size <TW Gain (L)>/ Adjusts the output volume of <TW Gain (R)> speaker size and crossover frequency the tweeter (left/right). * of the selected speaker (2), then display <TW FREQ>...
  • Page 49 SETTINGS SETTINGS ❏ Adjusting the Digital Time Alignment Select an item to make an adjustment. Determining the value for <Position DTA> (DTA) adjustment If you specify the distance from the center of the Make fine adjustments to the delay time of currently set listening position to every speaker, the speaker output to create a more suitable the delay time will be automatically computed...
  • Page 50: Adjustment For Video Playback

    4:3 signal 16:9 signal • You can also display the picture adjustment screen by selecting [Screen Adjustment] (for KW-V420BT /KW-V220BT /KW-V120BT )/[Picture <JUST> For viewing 4:3 pictures Adjust] (for KW-V320BT ) on the pop-up short- naturally on the wide screen cut menu (Page ...
  • Page 51: Changing The Display Design

    • Only for KW-V320BT : You can also display the Change the magnification (1), then move <User Customize> screen by selecting [User Panel color is selectable only for KW-V420BT /KW-V320BT . Customize] on the pop-up short-cut menu the zooming frame (2).
  • Page 52: Customizing The Home Screen

    SETTINGS ❏ Making your own color adjustment Display the image adjustment screen. Customizing the Home screen (only for KW-V420BT /KW-V320BT ) You can arrange the items to display on the Home Select [Panel Color] on the <User screen. Customize> screen. (Page 51) Display the <HOME Customize>...
  • Page 53: Customizing The System Settings

    You can update the system by connecting a USB ❏ Memorizing/recalling the settings device containing an update file. • You can memorize the settings changed in the • To update the system, visit <http://www.jvc.net/ < Settings> menu and recall the memorized cs/car/> . settings any time.
  • Page 54 SETTINGS SETTINGS ❏ Adjusting the touch position Touch the center of the marks at the upper left (1), the lower center (2), then the You can adjust the touch position on the touch panel if the position touched and the operation upper right (3) as instructed.
  • Page 55: Setting Menu Items

    SETTINGS SETTINGS ❏ <Audio> setting screen • Sound Response: Virtually makes the sound more Setting menu items realistic using the Digital Signal Processor (DSP) <Equalizer> ❏ Displaying the <Settings> menu screen system. Select the sound level. Change the sound mode or adjust and store the –...
  • Page 56 KW-V120BT) on the monitor panel. (Page 23) • OFF: Cancels. • OFF: Switches to the current source control screen. Only for KW-V420BT Region 1/KW-V320BT Region 1. To change the setting, turn off the AV source by pressing [AV Off] on the Home screen beforehand.
  • Page 57 <Clock> • Press [Enter] to display the information. Only for KW-V420BT Region 1/KW-V320BT Region 1. • To return to the previous screen, press [OK]. Adjust the clock time. (Page  4) Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT <iPod Setup>...
  • Page 58: Remote Controller

    REMOTE CONTROLLER REMOTE CONTROLLER V Caution: ❏ Changing the battery of the remote For KW-V320BT Region 1/KW-V220BT Region 1/ • Keep the battery out of reach of children and in controller KW-V120BT : To use the remote controller, original package until ready to use. Dispose of purchase RM-RK258 separately.
  • Page 59 Erases the misentry. • Each time you press DIRECT, the item to search • Tuner: for changes. Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT – Searches for stations automatically. 2 Press a number button to select a desired item. Region 1.
  • Page 60: Connection/Installation

    To prevent a short circuit, mounting and wiring work to professionals. do not remove the caps on the ends of the * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT • Make sure to ground the unit to a negative 12 V unconnected wires or the terminals.
  • Page 61 ❏ Installing the trim plate (only for Installing the unit KW-V420BT Region 4/KW-V320BT To prevent a short circuit, remove the key ❏ Installing the unit (only for KW-V420BT Region 4/KW-V220BT Region 4) · from the ignition and disconnect the Region 4/KW-V320BT Region 4/ battery.
  • Page 62: Connecting Wires To Terminals

    CONNECTION/INSTALLATION CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals Only for KW-V420BT Region 1/KW-V320BT Region 1/ USB terminal (1.0 m): See page 63.* KW-V220BT Region 1. See page 64. Only for KW-V420BT Region 1/KW-V320BT Region 1. See page 64. Only for KW-V420BT/KW-V320BT. 10 A fuse Connect the antenna cord to the For 3 way speaker system connection, see also page 64.
  • Page 63 CONNECTION/INSTALLATION CONNECTION/INSTALLATION ❏ Connecting a USB device ❏ Connecting an Android device ❏ Connecting iPod/iPhone USB device iPod/iPhone (Lightning iPod/iPhone (30-pin Android device (commercially available) connector models) connector models) (commercially available) (commercially available) (commercially available) KS-U62 (optional accessory) KW-V220BT KW-V120BT USB 2.0 cable 1.0 m (Front panel)
  • Page 64 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. Connect the microphone (7) to the MIC terminal. Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT • To install the microphone, peel off the adhesive Region 1.
  • Page 65 CONNECTION/INSTALLATION CONNECTION/INSTALLATION ❏ Removing the unit Removing the unit (Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Remove the trim plate. (See the left Region 4) column.) ❏ Removing the trim plate Insert the two extraction keys (4), then pull them as illustrated so that the unit can Engage the catch pins on the extraction be removed.
  • Page 66: References

    8 Mbps. ❏ To play new discs After starting the heater in the car. * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT New discs may have some rough spots around the If it becomes very humid inside the car.
  • Page 67: Disc Playback

    It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as the disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable. Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4. Continued on the next page...
  • Page 68 Make sure all important data has been backed up Do not leave a USB device in the car, or expose to * Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT to avoid losing the data. direct sunlight or high temperatures to prevent Region 1/KW-V120BT.
  • Page 69 • When operating an iPod/iPhone, some operations Bashkir Interlingua Burmese Telugu may not be performed correctly or as intended. In Byelorussian Interlingue Nauru Tajik this case, visit the following JVC web site: Bulgarian Inupiak Nepali Thai <http://www.jvc.net/cs/car/> Bihari Indonesian Norwegian Tigrinya •...
  • Page 70: Error Message List

    REFERENCES REFERENCES “Connection Error”: “Please update Pandora App”: Error message list • The device is registered but the connection has • The Pandora application on your iPod touch/ failed. Connect the registered device. (Page 40) iPhone/Android is not the latest version. Update If an error occurs while using the unit, a message the application.
  • Page 71: Troubleshooting

    REFERENCES REFERENCES “Pandora not available”: “SXM Check Tuner”: Troubleshooting • You cannot use the Pandora application from • Make sure the SiriusXM Connect Vehicle Tuner is the area where you are currently trying to access connected to the unit. What appears to be trouble is not always serious. Pandora.
  • Page 72 Videos cannot be played. [AUTO MODE]. • Connect with USB Audio and Video cable KS-U59 * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT • Make sure JVC Music Play APP is installed on the (optional accessory) to iPod/iPhone 30-pin Region 4. Android device.
  • Page 73: Specifications

    • For devices compatible with Bluetooth 2.0: RGB striped arrangement Enter the same PIN code for both the unit and * Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Back Lighting target device. If the PIN code of the device is not Region 1/KW-V120BT ).
  • Page 74 MP3/WMA/AAC/WAV Frequency (Hz) Through/30/40/50/60/70/80/90/ 44.1 kHz Sampling: 20 Hz to 20 000 Hz Video Decoder DivX*/MPEG1/MPEG2/JPEG 100/120/150/180/220/250 Total Harmonic Distortion * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Slope –6/–12/–18/–24 dB/Oct. 0.010% (1 kHz) Region 4. Gain –8/–7/–6/–5/–4/–3/–2/–1/0 dB Signal to Noise Ratio...
  • Page 75 4 V/10 kΩ Weight KW-V420BT Region 1: 2.3 kg (5.1 lbs) Preout Impedance ≤ 600 Ω KW-V420BT Region 4: 2.6 kg ( 5.8 lbs) Speaker Impedance 4 Ω to 8 Ω KW-V320BT Region 1/KW-V220BT Region 1/ KW-V120BT: 1.6 kg (3.6 lbs) KW-V320BT Region 4/KW-V220BT Region 4: 1.9 kg ( 4.2 lbs)
  • Page 76 Bluetooth SIG, Laboratories. AND NON-COMMERCIAL ACTIVITY AND/OR WAS Inc. and any use of such marks by JVC KENWOOD • Microsoft and Windows Media are either registered OBTAINED FROM A VIDEO PROVIDER LICENSED Corporation is under license. Other trademarks trademarks or trademarks of Microsoft Corporation BY MPEG LA TO PROVIDE MPEG-4 VIDEO.

This manual is also suitable for:

Kw-320btKw-v220btKw-120bt

Table of Contents