Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Adande VCS
Summary of Contents for Adande VCS
- Page 1 ® Adande Refrigeration Operations Manual...
-
Page 2: Table Of Contents
Contents Page ® What is the Adande System ® Adande Technology Explained EC Declaration of Conformity Storage of Product ® Operating Adande Temperature Settings The Display Controls Defrost Drawer Alarm Error Alarm Temperature Alarm Electrical Connection Location and Stability Servicing... -
Page 3: What Is The Adande ® System
40kg of product at any set point temperature, in the range of –22ºC to +15ºC. ® Figure 1: Front view of Adande Single Drawer unit ADE- 2015-B Page 3... -
Page 4: Ec Declaration Of Conformity
® Type: Adande Drawer Refrigeration Units ® Manufactured by Adande Refrigeration Ltd., Units 4 -9 Harvest Court, South Lowestoft Industrial Estate, Lowestoft, Suffolk NR33 7NB The following transposed harmonised European Standards have been used: EN ISO 12100 parts 1 & 2 Safety of Machinery – Basic concepts, general principles for design EN ISO 13857 Safety of Machinery –... -
Page 5: Storage Of Product
The unit is capable of storing any food product. However, products which may give off ® acidic odours like vinegar, onions, etc should be suitably sealed. Adande also recommends containers with liquid food products be stored with lids. - Page 6 Press button “i”again to display ‘LOC’ g) Hold the “i” button to display either yes h) Press either of the buttons to or no change yes/no setting ® Figure 3: Locking Adande Display Control Panel ADE- 2015-B Page 6...
-
Page 7: Defrost
Should “LO” appear on the display, the drawer temperature has fallen below its set point ® by 7° C. Product core temperature should be inspected. If the Adande unit drawer temperature set point has recently been increased, this alarm could be displayed. If the temperature does not return to the set point temperature, an engineer should be called. -
Page 8: Electrical Connection
13 amp 3 pin plug (fused at 13A). The ® other end of the supply lead, fitted with an appliance plug, is connected to the Adande unit as shown in figure 3a below. -
Page 9: Location And Stability
Location and Stability ® It is important that the Adande unit is installed and maintained on a flat, clean and level surface to ensure correct operation. The room should be dry and sufficiently ventilated. Optimum performance is obtained at ambient temperatures between +16ºC (60ºF) and +38ºC (100ºF). -
Page 10: Servicing
Service personnel must be suitably trained in refrigeration and experienced in servicing ® Adande units ® Select only from the list of Adande Approved and Registered Service Engineers. REGULAR SERVICING AT 12 MONTHLY INTERVALS IS ESSENTIAL TO RETAIN THE WARRANTY CONDITION. ACCESS PANELS MUST NOT BE REMOVED BY UNTRAINED PERSONNEL Advice and help can be obtained to resolve any problems that may occur during operation ®... -
Page 11: Unit Maintenance
• No obstructions should be placed directly in front of the condenser air outlet. • Unit should be serviced at least once every 12 months. 7.0 Unit Maintenance The airflow through the Adande unit is designed to deposit grease and dirt on the outside surface of the insulated drawer and internal surfaces of the drawer housing. -
Page 12: Contact Details
4. Clean the steel surfaces with a polish cleaner. NOTE: DO NOT USE STEEL PADS, WIRE BRUSHES, SCRAPERS OR CHLORIDE CLEANERS TO CLEAN STAINLESS STEEL. NOTE: DO NOT PRESSURE WASH EQUIPMENT AS DAMAGE TO ELECTRICAL COMPONENTS MAY RESULT. 8 Appendix 1: Contact Details Stoddart Food Service Equipment Service &...
Need help?
Do you have a question about the VCS and is the answer not in the manual?
Questions and answers