Table of Contents
Advertisement
OPERATION
Turning Power On and Off
Press
POWER
using the remote control, be sure it is in cable mode by pressing
before pressing
Changing Channels
You can change channels in two ways:
•
Press
press
channel selection.
•
Enter the number of the channel you wish to view using the number
keys on the remote control.
Adjusting the Volume
Press
VOLUME
you adjust the volume, the volume scale is displayed on the screen.
Press
MUTE
For best audio quality, use the remote control to set the cable terminal to
approximately ¾ of the maximum volume level and then adjust the audio
levels on external devices such as your TV or A/V Receiver.
Interactive Program Guide
The interactive program guide (IPG) displays information about TV
programs and enables you to access features such as Parental Control
or Pay-Per-View. IPGs can vary with each cable provider. Refer to your
IPG manual for detailed instructions.
This Manual: http://www.manuallib.com/file/2587933
on the front panel to turn the cable terminal on or off. When
.
POWER
or
CHANNEL
+ or - on the remote control to step through the
CHANNEL
+ or – on the remote control to adjust the volume. When
on the remote control to turn the sound off and on again.
on the cable terminal front panel, or
6
CABLE
Advertisement
Table of Contents
