Screen Mirroring; Server Network Settings; Connect To Server; Magicinfo Mode - Samsung DB10E-POE User Manual

Screen Mirroring

MENU m → Network → Screen Mirroring
Connect a mobile device that supports the mirroring function to the product. This allows the screen and
sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen
and sound from a mobile device on a display device.
― To use
Screen Mirroring, make sure the mobile device supports the mirroring function such as
AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,
visit the mobile device manufacturer website.
― Screen or sound output may be choppy if there is network congestion.
― Model DB10E-T is only supported.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches and
displays the product in a list.
― If the mobile device cannot connect to the product, turn them off and then on again, and try again.
→ ENTER E

Server Network Settings

MENU m → Network → Server Network Settings

Connect to server

Player
To run connect to a network.
Server Address SSL Port
• / /
― If the
SSL option is enabled, the server is configured to use https and data transfer is encrypted.
― Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)

MagicInfo Mode

MagicInfo Mode
Select the appropriate depending on the environment where you are using the
product.
Lite Premium
• /

Server Access

Select a method to connect the server network.
Allow / Deny
•

FTP Mode

Specify the FTP operating mode.
Active / Passive
•
→ ENTER E
115