Engine Maintenance; Maintenance Schedule; Changing Engine Oil; Oil Recommendations - Troy-Bilt storm 3090 Operator's Manual

Two-stage snow thrower
Table of Contents

Advertisement

Available languages

Available languages

Engine Maintenance

WARNING!
the engine and remove the key before performing
any type of engine maintenance.

Maintenance Schedule

Tasks
First 5 Hrs. Each Use or
Check engine oil
Change engine oil
Check spark plug
Service spark plug
Clean exhaust area

Changing Engine Oil

NOTE: Check the oil level before each use and after every five
hours of operation to be sure correct oil level is maintained. Refer
to Checking Oil Level in the Operation section
1.
Drain fuel from tank by running engine until the fuel tank is
empty. Be sure fuel fill cap is secure.
2.
Place suitable oil collection container under oil drain plug.
3.
Remove oil drain plug, Figure 7-1.
Oil Drain
Oil Plug
4.
Tip engine to drain oil into the container. Used oil must be
disposed of at a proper collection center.
5.
Reinstall the washer and drain plug and tighten securely.
20
To prevent accidental start-up, shut off
Every Season
Every 5 Hrs.
or 25 Hrs.
Figure 7-1
Periodic inspection and adjustment of the engine is essential if
high level performance is to be maintained. Regular maintenance
will also ensure a long service life. The required service intervals
and the type of maintenance to be performed are described
in the table below. Follow the hourly or calendar intervals,
whichever occur first. More frequent service is required when
operating in adverse conditions.
Every Season
Every Season
or 50 Hrs.
or 100 Hrs.
6.
Refill with the recommended oil and check the oil level,
refer to Operation section for instructions.
7.
Reinstall the oil filler cap/dipstick securely.
CAUTION:
Thoroughly wash your hands with soap
and water as soon as possible after handling
used oil.
NOTE:
Please dispose of used motor oil in a manner that is
friendly to the environment. Take it to a recycling center or other
collection center.

Oil Recommendations

When adding oil to the engine, refer to viscosity chart below.
Engine oil capacity is 1100 ml (approx. 37 oz.). Do not over-fill.
Use a 4-stroke, or an equivalent high detergent, premium
quality motor oil certified to meet or exceed U.S. automobile
manufacturer's requirements for service classification SG, SF.
Motor oils classified SG, SF will show this designation on the
container.
-40º
-20º
-30º -20º -10º 0º
CAUTION:
DO NOT use nondetergent oil or
2-stroke engine oil. It could shorten the engine's
service life.
7
Service Dates
Synthetic
0W-30
5W-30
0º 20º 40º

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the storm 3090 and is the answer not in the manual?

Questions and answers

Mark
March 28, 2025

Where do you fill the oil at, and what brand of oil do you recommend 4 stroke engine oil

1 comments:
Mr. Anderson
March 28, 2025

You fill the oil on a Troy-Bilt Storm 3090 at the oil fill cap, which is accessed by unscrewing the dipstick. The recommended engine oil is a 4-stroke, high detergent, premium quality motor oil certified to meet or exceed U.S. automobile manufacturer’s requirements for service classification SG or SF. No specific brand is mentioned.

This answer is automatically generated

Hans Kamping
April 19, 2025

how to drain gas

Table of Contents

Save PDF