Download Print this page

Sharp Microwave Drawer Series Installation Manual

Advertisement

Quick Links

SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CLEARANCES ANd dImENSIoNS
For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated
clearances and dimensions on page 2. See Figure 1.
UNPACkING yoUR mICRoWAvE dRAWER
• Remove all packing
materials from inside
t h e M i c r o w a v e
D rawer. DO NOT
R E M O V E
T H E
W A V E G U I D E
COV ER, which is
located on the top
of t he M icrowave
Drawer.
• Remove the feature
sticker, if there is one.
Check the drawer for
any damage, such as
misaligned or bent drawer, damaged drawer seals and sealing
surfaces, broken or loose Microwave Drawer guides and dents
inside the cavity or on the front side of the drawer. If there is
any damage, do not operate the Microwave Drawer and contact
your dealer or a SHARP AUTHORIZED SERVICER.
ImPoRtANt NotES to thE INStALLER
• Read all of the Installation Manual before installing the

Microwave Drawer.

• Remove all packing material before connecting the electrical
supply.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
Microwave Drawer
InstallatIon Manual
Sealing
surface
Waveguide
cover
ImPoRtANt NotES to thE CoNSUmER
Keep this manual with your Operation Manual for future
reference.
• As when using any microwave oven generating heat, there
are certain safety precautions you should follow. These are
listed in the Operation Manual. Read all and follow carefully.
• Be sure your Microwave Drawer is installed and grounded
properly by a qualified installer or service technician.
ImPoRtANt SAfEty INStRUCtIoNS
Sealing
surface
exactly, a fire or electrical shock may result that could cause
Oven
property damage, personal injury or death.
cavity
Drawer must be secured by a properly installed Anti-Tip
block.
• This Microwave Drawer must be electrically grounded in
accordance with local codes.
• Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the
Microwave Drawer.
the area where a Microwave Drawer is in use. Never leave the
drawer open when the microwave is unattended.
result in serious injuries and can also cause damage to the
Microwave Drawer.
• Do not use the Microwave Drawer as a storage space.
This creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not, touch
Stop/Clear to prevent unintended use.
1
If the information in this manual is not followed
To reduce the risk of tipping, the Microwave
Never leave children alone or unattended in
Stepping, leaning or sitting on the drawer may

Advertisement

loading

Summary of Contents for Sharp Microwave Drawer Series

  • Page 1: Microwave Drawer

    Microwave Drawer and contact your dealer or a SHARP AUTHORIZED SERVICER. • Make sure the wall coverings and the cabinets around the Microwave Drawer can withstand the heat generated by the ImPoRtANt NotES to thE INStALLER Microwave Drawer.
  • Page 2 Power cord access hole in cabinet should be a minimum " diameter hole and deburred of all sharp edges. " Always allow sufficient power cord length to the IMPORTANT electrical outlet to prevent tension.
  • Page 3 ANtI-tIP BLoCk NORMAL INSTALLATION STEPS ANTI-TIP BLOCK INSTALLATION INSTRuCTIONS To reduce the risk of tipping of the drawer, the Anti-Tip block must be properly installed located 14 -inches above the floor on which the Microwave Drawer will sit. The 6-inch Anti-Tip block must be provided by the installer.
  • Page 4 1. Place the drawer adjacent to the wall or defective workmanship or materials in this range. cabinet opening. Plug the power supply Refer to the warranty in your Operation Manual for Sharp’s cord into the electrical outlet. toll-free service number and address. Please call or write if you 2.