Audible User Feedback Tones - Kenwood TK-280 Service Manual

TK-280
Copy from TX/RX Address
You can select to copy the digit to the memory when you
change the channel, using [Selector] key.
The memory represents the code that is displayed by the
keypad.
Or Key Buffer, "^K1 ... ^K8" used by Encode Format.
Receive Digit in "RX Address" is copied when the channel
is changed. Selcall/Status Digit in "TX Address" is copied when
the channel is changed.
Encode Code
When "Special Setting" is disabled, you can select the
Encode Code to transmit when [Call 1-6] key is pressed.
You can select up to 3 codes to transmit 3-frame 5tone
code. The Encode Code is transmitted from left to right digit.
24 different Encode Codes are available.
When "Special Setting" is enabled, you can select the
Encode Format setting from #1 to #32.
You can select the Encode Format name, configured in
Encode Format menu.
Decode Code
When "Special Setting" is disabled, you can select the
Decode Code setting from #1 to #8.
The transceiver tries to decode the selected Decode Code
setting (maximum 8 different settings) at the same time. When
the code matches in "5tone Code" menu, the transceiver
operates as programmed in "Decode Code" menu.
When "Special Setting" is enabled, you can select the
Decode Format setting from #1 to #32.
You can select the Decode Format name, configured in
Decode Format menu.
You can program the 5-tone code you want to receive for
each channel. At the same time, you can be on stand-by for a
Single tone.
If the 5-tone code set in your transceiver matches a received
code, Monitor is activated and a beep sounds. You can display
the received 5-tone code on the LCD screen and transmit an
acknowledgement to the Base station. Furthermore, you can
activate the Horn Alert, Transfer, stun, and kill features.
Selcall/Status List
You can program Selcall or Status Message when you select
the party from the List to make a 5tone selective call. Or you
want to display Selcall(Status) Code or Message when you
receive the call.
Maximum 8-digit can be programmed for the Code and 100
different Selcalls or Status are available for Selcall/Status List.
You can assign 16 alphanumeric characters to each
message.
14
OPERATING FEATURES
the expected 5-tone is received.
and frequency and duration for the Alert Tone.
the beep tone type from No. 1 to No. 47, using the Encode/
Decode format.
y o u s e l e c t " F e a t u r e L e v e l " = F U L L a n d " S p e c i a l
Setting"=Enabled.
the technical knowledge of 5tone signalling functions. Of
course, you can write the script to perform all the functions
that you can do with "Feature Level"=BASIC and FULL and
"Special Setting"=Disabled. (Menu driven method)
functions and signalling timing.
details. Sample scripts are also available in the KPG-60D.
Formats. You can assign a name up to 12 characters for each
Encode/Decode Format.

8. Audible User Feedback Tones

notify the user of the transceiver operating state. The main
tones are listed below.
high tone is output for 500ms.)
TOT, battery warning and PLL unlocked. It is output until the
PTT button is released.
option signalling is received.
signalling is received.
tone option signalling is received.
Programmable Alert Tone
You can program the alert type from type 1 to type 8, when
You can program the number of times to repeat outputting
When you select "Special Setting", you can further configure
Encode/Decode Format
You can use Encode/Decode Format script function when
In order to write the Encode/Decode Format script, you need
In addition, you can write the original script to control various
Refer to each function of Encode/Decode Format Code for
You can create 32 different types of Encode/Decode
The transceiver outputs various combinations of tones to
Power on tone
This tone is output when the transceiver is turned on. (The
Alert tone
This tone is output when the transceiver is TX inhibition for
Group call tone
Sounds when a group call with the correct DTMF/2-tone
DMS signalling alert tone
Sounds when an individual call with the correct DMS
Individual call tone
Sounds when an individual call with the correct DTMF/2-