Cleaning the Washer-dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose EWDE 7145 Precautions and tips, 7 General safety Disposal Description of the Washer-dryer, 8-9 Control panel...
Installation ! Keep this instruction manual in a safe place for any vibrations, noise and shifting during ope- future reference. Should the appliance be sold, ration. If it is placed on a fitted or loose carpet, transferred or moved, make sure the instruction adjust the feet in such a way as to allow enough manual accompanies the washer-dryer to inform room for ventilation beneath the washer-dryer.
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washer- a wall drain situated dryer’s plug.
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
Technical data Model EWDE 7145 width 59.5 cm Dimensions height 85 cm depth 53,5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme Electrical please refer to the technical...
Care and maintenance Cleaning the pump Cutting off the water and electri- city supplies The washer-dryer is fitted with a self-cleaning pump which does not require any maintenan- • Turn off the water tap after every wash cycle. ce. Sometimes, small items (such as coins or This will limit wear on the hydraulic system buttons) may fall into the pre-chamber which inside the washer-dryer and help to prevent...
Precautions and tips • ! This washer-dryer was designed and constructed in The door can become quite hot during the wash cycle. • accordance with international safety regulations. The fol- If the appliance has to be moved, work in a group of two lowing information is provided for safety reasons and must or three people and handle it with the utmost care.
Description of the Washer-dryer Control panel OPTION TEMPERATURE ON/OFF START/PAUSE buttons with Button button button with indicator light indicator lights DISPLAY Detergent dispenser drawer DRYING SPIN SPEED Button WASH CYCLE Button knob Detergent dispenser drawer: used to dispense START/PAUSE button with indicator light: when the detergents and washing additives (see “Detergents and green indicator light flashes slowly, press the button to...
Page 9
Display The display is useful when programming the machine and provides a great deal of information. The duration of the available programmes and the remaining time of a running cycle appear in section A; if the DELAY START option has been set, the countdown to the start of the selected programme will appear. Furthermore, pressing the corre- sponding button allows you to view the maximum temperature, spin speed and drying level or time values attained by the machine during the selected cycle.
How to run a wash cycle or a drying cycle B - Based on a set time period: between 30 and 180 1. SWITCH THE MACHINE ON. Press the button; minutes. the START/PAUSE indicator light will flash slowly in a green colour.
Detergents and laundry Detergent dispenser drawer Cotton 45’: short cycle designed to wash delicate cotton items. Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily Special wash cycles result in a more efficient wash, and may in fact cause build Wash&Dry 90’: The cycle guarantees the washing and up on the inside of your appliance and contribute to envi-...
Troubleshooting Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on.
Page 14
The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Indesit’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Indesit reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage.
Need help?
Do you have a question about the EWDE 7145 and is the answer not in the manual?
Questions and answers