Connecting To Hdtv Devices/Dvd Players - Faroudja FDP-DILA2 Installation And Operation Manual

Connecting to HDTV Devices/DVD Players

Before connecting, be sure to turn off both the projector and HDTV devices/DVD players.
• Thoroughly read the manual that comes with each HDTV device or DVD player.
• Use separately available BNC cables to connect HDTV devices and DVD players.
To Y
To PC 2
To P
To P
BNC cable
(separately available)
HDTV sources can either be
sent as pass-through via the
video processor or connected
directly to the projector.
Note
• Connect a component signal output device or DTV-format signal output device.
Memo
• Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected.
(*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p, 720p, 1080i) can be input. For DTV-format signals which can be handled, refer to "Video
signals" on page 22.
/B-Y
B
/R-Y
R
IN
HDTV devices
R
Y
Y/C
G
P /B-Y
B
VIDEO
B P /R-Y
R
REMOTE
H
V
IN OUT
DVD player
Connecting to Various Devices
Video Processor
25