Attaching The Battery Pack - Motorola MINITOR VI User Manual

Attaching the Battery Pack

For best performance, the lithium-ion
battery pack should be fully charged before
it is used.
IMPORTANT: To avoid damage and
comply with warranty terms, charge the
battery pack using a Motorola charger as
described in the Amplifier Charger
RLN6506 User Guide (Motorola
Publication Number 68012010008) and
Standard Charger RLN6505 User Guide
(Motorola Publication Number
68012010009).
Follow the procedures described next to
attach the battery pack.
1.
Press and hold the belt clip down.
2.
Align the battery pack at the back of the
pager.
3.
Slide the battery pack upwards to the
maximum and slide the latch to the
locked position.
Note: If the battery pack is not installed
properly, the pager will not power up.
9
English