Miscellaneous Settings; Software Upgrade; Upgrade By Usb; Http Upgrade - Edision DV3 T2 User Manual

11.7 Miscellaneous Settings

When you enter to "Miscellaneous Settings" menu, you
will see a screen like below:
1 Subtitle Auto: You can press [Left/Right] key to
select "On" or "Off". If the current channel has
subtitle information, it will be showed up
automatically while this function is "ON", if this
function is "OFF", you need turn on the subtitle
manually by press [Yellow] key.
2 Auto Power Down: You can press [Left/Right] key
to select the time or "Off", if you select time,
duration this time if no any operation on receiver, it
will go to standby mode.
3 Standby mode: if set to "Real", Press power key
receiver will be in real standby status, the
consumption will be less than 0.5 Watt. If it's set to
"Fake", Press power key, receiver will be in fake
standby status.
4 OSD Timeout: When you switch channels in full
screen, there will show up some information about
current channel on the lower of the screen. And
regarding to the duration of these information
show up on the screen, you can press [OK] and
[up/ down] key to set the time. The range of the
duration is "1 second ~ 10 seconds".
5 OSD Position: control display position of the info
bar in full screen mode. You can choose "bottom"
or "top".

11.8 Software Upgrade

11.8.1 Upgrade By USB

In this menu you can upgrade the software from USB
conveniently, Press "Left/Right" button select USB A or
USB B; press ' OK ' button to enter.
In this menu you can select the Upgrade Mode among
Software(No channel list), Channel list, All
SW+bootloader and All SW+Channel list, and you can
select the appropriate upgrade file on "Upgrade File"
item. After you select the "Upgrade Mode" and "Upgrade
File", press ' OK ' button on "Start" item, the receiver can
upgrade automaticlly.
Note:
You must put the upgrade file on the /ROOT
DIRECTORY of the USB storage.

11.8.2 Http Upgrade

23