Volume Control - Sharp HT-SB32D Operation Manual

Sound bar home theater system
Hide thumbs Also See for HT-SB32D:
Table of Contents

Advertisement

Precautions
■ General
Keep your equipment at least 4" (10 cm) of free
space along the sides, top and back for proper
ventilation.
4" (10 cm)
SOUND BAR HOME THEATER SYSTEM HT-SB32D
Use the unit on a firm, level surface free from
vibration.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatu-
res higher than 140°F (60°C) or to extremely low
temperatures.
If the unit does not work properly, unplug and plug
it in again. Then turn on the unit.
In case of an electrical storm, unplug the unit for
safety.
Hold the AC power plug by the head when remo-
ving it from the AC outlet, as pulling the cord can
damage internal wires.
The AC power plug is used as a disconnect devi-
ce and shall always remain readily operable.
Do not remove the outer cover, as this may
result in electric shock. Refer internal service
to your local SHARP service facility.
This unit should only be used within the range of
41°F - 95°F (5°C - 35°C).
SHARP is not responsible for damage due to
improper use. Refer all servicing to a SHARP
authorized service center.
4" (10 cm)
4" (10 cm)
E-4
Warning:
The supplied AC/DC adaptor contains no user
serviceable parts. Never remove covers unless
qualified to do so. It contains dangerous voltages,
always remove mains plug from the main outlet
jack before any service operation or when not in
use for a long period.
The AC/DC adaptor supplied with the HT-SB32D
must not be used with other equipment.
Never use an AC/DC adaptor other than the one
specified. Otherwise, problem or serious hazards
may be created.
The voltage used must be the same as that
specified on this unit. Using a higher voltage is
dangerous and may result in a fire or other type
of accident causing damage. SHARP will not be
held responsible for any damage resulting from
such usage.

■ Volume control

The sound level at a given volume setting depends
on speaker efficiency, location and various other
factors. It is advisable to avoid exposure to high
volume levels, which occurs while turning the unit
on with the volume control setting up high, or while
continually listening at high volumes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents