Samsung WAM750 User Manual page 25

Wait until the LED indicator on the Product stops flashing. If the Product's LED indicator
4
turns solid blue, pairing is complete.
noteS
9 Place each Product at least 20 inches (50 cm) from the HUB when connecting them to the HUB.
9 Your smart device cannot connect to the Product or the HUB if there is no wireless router.
9 To confirm you have a proper connection, check the pairing indicator on the front of the HUB.
- When you turn on the HUB for the first time, there is a 20 minute pairing period.
The pairing indicator (
SPK ADD
the
pairing indicator (
to pair while the pairing indicator is flashing.
- If pairing mode has expired, press the
mode again. Then, turn the product off and then on or press the
product to link the product to the HUB.
9 For a proper connection, connect the HUB to your router before turning on the Product.
- Connecting the Product to the HUB may take a few minutes.
- There will be a brief sound when the connection is established.
Connect your smart device to your Wi-Fi network. (The HUB and the smart device should
5
be connected to the same router.)
) will blink for these 20 minutes or until pairing occurs. When you press
button to pair additional Products, the pairing period is reduced to 10 minutes. The
) flashes for 10 minutes or until pairing occurs. Turn on the Product you want
SPK ADD
button on the rear of the HUB to turn on pairing
4444 25
SPK ADD
button on the rear of the