Grease Filters - Miele DA 5320 W Operating And Installation Instructions

Hide thumbs Also See for DA 5320 W:
Table of Contents

Advertisement

Cleaning and care
Important for appliances with
lacquered housing
(special order finish)
It is very difficult to clean this type of
surface without causing minor marks to
the surface material. This can become
particularly noticeable with darker
colours and if there is halogen lighting
in the kitchen.
Controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove soiling straight away.
Observe the General notes on cleaning
earlier in this section.
Do not use stainless steel cleaning
agents on the controls.

Grease filters

The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.
To avoid a build-up of grease, the
grease filters should be cleaned
regularly (at least every 3-4 weeks), but
always clean immediately if the grease
filter indicator lamp comes on.
20
,
An oversaturated filter is a fire
hazard.
If decor panels are fitted as an optional
extra, these need to be removed first.
^ To do this, disengage them from their
catches.
^ See the notes under "Housing" for
how to clean the decor panels. Like
the grease filters, they can be
cleaned in the dishwasher.
^ To take out the grease filters, release
the locking clip on the filter, lower the
filter 45°, unhook it at the back and
remove it.
To avoid damaging the filters or the
cooktop below, make sure you hold
the filters securely at all times when
handling them.

Advertisement

Table of Contents
loading

Table of Contents